Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Accessories

RockShox Parker O-lube
$5.00
Recommended by RockShox for shock rebuilds. • Rear shock seals lubricant • 2g tube
RockShox Air Can Service Kit
$17.00 - $19.00
• Service kits include air can seals and wiper • Available for RockShox air rear shocks--Ario, Monarch, Monarch RT3, DebonAir and Monarch Plus
RockShox Fork Service Kit
$17.00 - $44.00
Service kits include dust seals, foam rings, oil seals, air and damper o-rings needed for basic service.
RockShox Deluxe 200 Hour/1 Year Service Kit
$61.00
- 200 Hour/1 Year Service Kit for Deluxe/Deluxe Remote A1-B2 (2017-2020)/Deluxe Nude B1+ (2019+) - Includes Air Can Seals, Piston seal, Glide Rings, IFP Seals, Remote Spares
Race Face Stash Tool Wrap
$21.99
Free Your Pockets Why carry your tools yourself? Strap them to your bike and forget about them until you actually need them. Enough room for a CO2 cartridge, a small selection of tools + tire levers, and a spare tube. - Stretch hook-and-loop strap adjustment - Ripstop nylon construction - Printed silicone grip - Tri-fold design - 3 inner pockets
Portland Design Works Bar-ista Coffee Cup Holder
$17.00
Sometimes you don't want to leave your cup of joe at home. Enter: Portland Design Works' Bar-ista to keep your morning beverage within easy reach. This handy accessory fits most travel mugs and attaches to 26.0mm handlebars. Drop in your travel mug (with a good lid to avoid splash stains) and enjoy the ride. - Constructed of 5052 alloy and lined with rubber to better grip travel mugs - Weight: 71g (2.5 ounces) - Dimensions: 8cm (3.125") diameter at top, tapering to 7.5cm (2.95") at bottom - Lifetime PDWarranty
Planet Bike Rubber Stay Caps
$4.00
- 8 rubber fender stay caps - Compatible with all Hardcore, SpeedEZ, Cascadia, Cascadia ALX, and Grasshopper fenders
Planet Bike SpeedEZ Fenders (Road)
$54.99
Planet Bike's SpeedEZ Fenders keep you dry in wet weather and are easily removed when the sun comes out. Made from nearly indestructible Superflex polycarbonate and rustproof stainless-steel stays, these fenders also utilize a clever, pre-installed attachment system so you can mount and remove them in seconds.
Planet Bike Hardcore Fenders (ATB)
$59.99
Turn your mountain bike into an all-weather vehicle with Planet Bike's Hardcore Fenders. Made of unbreakable Superflex polycarbonate with stainless-steel stays, they're ultra tough. They boast mudflaps for the ultimate in splash and spray protection and the front fender has release tabs for easy on/off. Plus, the hardware is pre-installed for quick mounting.
Planet Bike Hardcore Fenders (Road)
$59.99
Turn your bike into an all-weather vehicle with Planet Bike's Hardcore Fenders. Made of unbreakable Superflex polycarbonate with stainless-steel stays, they're ultra tough. They boast mudflaps for the ultimate in splash and spray protection and the front fender has release tabs for easy on/off. Plus, the hardware is pre-installed for quick mounting.
Pedro's Tire Levers
$4.50
The tire lever, though seemingly one of the simplest and most basic of cycling tools, is one commonly used by almost every cyclist, and unfortunately, one often responsible for unnecessary frustration. Really, what is more fun than flatting far away from home, being thrilled you lugged that spare tube and pump, and then having your tire levers snap in two? Pedro's award-winning, universally loved tire levers feature molded box construction and a proprietary plastic composite blend that makes them the strongest levers available. The unique chisel tip shape easily inserts beneath the tire bead and the slightly thicker shape keeps the lever securely in place. Additionally, the bold shape of the lever and helpful dual spoke hooks makes removal of even the tightest tires a simple task. - Award-winning and universally loved - Molded box construction and proprietary plastic blend makes these the strongest levers available - Chisel tip shape is easy to insert beneath the bead and the slightly thicker shape keeps the tire lever from slipping - Bold shape makes it easy to remove the tightest of tires without bending or breaking
Pedro's Chain Checker Plus II
$19.99
Checking your chain for wear is one of the simplest things any cyclist can do to maintain drivetrain performance and minimize maintenance costs. The Pedro's Chain Checker Plus II makes this task quick and easy offering a simple check of 50% and 75% chain wear. To ensure the maximum life from your chain and accuracy of measurement, the tool employs a three-point design which properly isolates pin wear from roller wear. Other two-point designs do not and can incorrectly indicate a worn chain, robbing the user of additional miles and money. The Chain Checker Plus II also includes a chain hook tool, perfect for simplifying chain removal and installation, and a chainring nut wrench, essential for removal and installation of chainrings. - Three point chain wear tool design properly isolates pin wear from roller wear - Includes a chain hook tool for simplifying chain removal and installation, and a chainring nut wrench for removal and installation of chainrings - Two chain wear indicators: 50% and 75% - Improved user instructions are laser etched on the tool
Park Tool Super Patch Kit
$3.99
The Super Patch Kit is comprised of a small plastic case, a piece of sandpaper for roughing up the tube and 6 peel-and-stick patches so no gluing is required. The patches stick fast thanks to 3M technology and they're thin and flexy to stretch with the tube. There's no easier way to patch a tube.
Park Tool Shop Cone Wrench
$9.95 - $9.99
Park's Cone Wrenches are made of durable tool steel and are nice and thin to fit on the small-clearance cones found on hubs and other bearing assemblies. Plus, they work as regular wrenches, too. They feature Park's special Y heads that put more material where it's needed for excellent durability and strength. Most applications require at least 2 cone wrenches. If you have questions please contact us and we can recommend the correct sizes for your needs.
Park Tool Synthetic-Blend Chain Lube
$10.99
Keep your chain running smoothly with Park's Synthetic-Blend Chain Lube. It uses PTFE and a proprietary blend of oils to penetrate, reduce friction, prolong chain life, displace moisture and protect chains from rust and corrosion. Plus, it works great on cables, spokes, and derailleur and brake pivots, too.
Park Tool Triple Spoke Wrench
$11.99
• Updated to fit better in the hand with a more rounded, smoother shape • The precision sized SW-7.2 fits the three most popular spoke nipple sizes on the market • Nickel plated for years of service • Designed for the home mechanic. FIts the following size spoke nipples: • .127" (3.23mm) • .130" (3.30mm) • .136" (3.45mm)
Park Tool Compact Crank Puller
$19.99
Park's Compact Crank Puller is used to remove Shimano Octalink, ISIS Drive and square-taper cranksets. It includes 2 rotating tips (16.3 and 11.3mm) to make the job easy. This is a great tool for your travel and home tool kit.
Park Tool BBT-22 Bottom Bracket Tool
$20.95
The BBT-22 is a shop-quality tool for installing and removing Shimano and ISIS Drive splined 20-tooth bottom bracket cups. Made from investment-cast steel, the BBT-22 ensures maximum engagement with the bottom bracket cup. It can be used with a 3/8-inch drive torque wrench, a 3/8-inch ratchet driver, a 32mm wrench, the Park FRW-1 Freewheel Remover Wrench (sold separately), or a 1-inch wrench.
Park Tool Micro Pump
$20.99
Park Tool's Micro Pump is a super small micro pump that fits in just about any bag or jersey pocket or mounts directly to the frame. Ideal to take along when space and weight are an issue. Aluminum barrel with a locking dual head and soft-touch dual-density flip out handle. - Presta and Schrader valve compatible - Maximum pressure: 100 psi / 7 bars - Weight: 3.7 ounces (105g) - Length: 7 7/8" (200mm) - Includes mounting hardware to securely attach to water bottle bosses or under bottle cage
Park Tool LRT-3 Lockring Tool
$24.99
Designed and built to remove and install the direct mount lockring that retains front chainrings found on some Specialized, Cannondale and FSA modular cranks. - Fits chainring of Specialized, Cannondale and FSA - For lockrings with 47–48mm outside diameter and 4 or 8 notches - Fits both 4 notch (FSA and Cannondale) and 8 notch (Specialized) lockrings - 36mm hex drive to be used with Park Tool TWB-36 Crow Foot and a torque wrench to properly measure torque - Constructed of 4140 heat-treated steel and plated for long life
Park Tool Mini Chain Brute Chain Tool
$24.99
Park's Mini Chain Brute Chain Tool goes anywhere and features a V-shaped handle, a super-strong replaceable pin, and fine threads to make chain removal and installation a breeze. The CT-5 works on any derailleur chain, including Shimano Hyperglide and 9-, 10-, and 11-speed. It works for loosening tight links, too.
Park Tool Bottom Bracket Wrench (External Bearing)
$27.95
The Bottom Bracket Wrench removes and installs Shimano Hollowtech II, Race Face X-type, FSA MegaExo, Campagnolo Ultra-Torque and TruVativ Giga X-pipe bottom brackets. Laser cut for a precise fit, one end of the BBT-9 securely engages the 16 cup notches, while the other end engages the 8 internal splines of the crankarm adjustment cap.
Park Tool Shop Hammer
$30.95
Park's Shop Hammer is designed specifically for use on bicycles. It features a unique dual-sided head with both steel and plastic striking surfaces, a reinforced fiberglass shaft and a soft, comfortable molded handle. The HMR-4 proves that sometimes a hammer is the best tool for the job.
Park Tool HCW-16.3 Chain Whip/Pedal Wrench
$32.95
The HCW-16.3 is a combination 15mm pedal wrench and chain whip. Use for both pedal removal/installation and for cassette removal. Chain whip features improved compatibility with 5-speed to 12-speed mountain and road bike cassettes and freewheels. The HCW-16.3 is 10.75" long (27.3cm).
Park Tool Adjustable Wrench
$39.95
Big and powerful, Park's Adjustable Wrench is forged from steel and chrome plated for maximum durability. Its jaws open up to 36mm and the torque-friendly, 12-inch handle is vinyl dipped for comfort.
Park Tool Home Mechanic Floor Pump PFP-8
$49.99
Easy to use, powerful, durable and economical, Park Tool's PFP-8 Home Mechanic's Floor Pump has a place in every garage and home bike shop and is perfect to take along to cycling events, too! It inflates like a champ thanks to its sturdy steel barrel, tough handle, composite thumblock head that fits Presta and Schrader valves, sturdy steel base, long hose and extra-large, easy-to-read gauge.
Park Tool CP-1.2 Cassette Pliers
$51.95
Secure engagement, easy to use, and fast! The CP-1.2 quickly grips cogs from 9 to 24 teeth with no manual adjustments. A great shop tool, the CP-1.2 is 13.7-inches (35cm) long and can be used with one hand to hold any 5-speed to 12-speed road or mountain cassette solidly during lock ring removal. Forged steel construction with a spring loaded return and comfortable dual density grips.
Park Tool SBK-1 Suspension Bearing Kit
$289.99
The SBK-1 is a professional level kit for installing and removing cartridge bearings in bicycle suspension pivots. A comprehensive set of 27 precision-machined hard-anodized guides enables compatibility with a wide range of bearing inner and outer diameters. Combined with our proven bearing press design, the SBK-1 quickly and easily pushes the old bearing out of the linkage and reinstalls the new bearing precisely and squarely. - Magnetic back plate for easy configuration and assembly - Organized in a convenient storage case Includes extractor cups/drifts for the following ODs: - 16mm - 17mm - 19mm - 20.6mm - 21mm - 22mm - 22.3mm - 24mm - 26mm - 28mm - 28.6mm - 30mm - 32mm - 35mm Includes extractor studs and pilots for bearings with the following IDs: - 8.5–9mm - 10mm - 12mm - 12.7mm - 15mm - 17mm - 20mm NOTE: For bearing extraction, the SBK-1 requires a minimum of 3mm of flat linkage structure outside the bearing to support the extractor cup/drift. For bearings without this flat structure, consider using the Park Tool SHX-1 Slide Hammer Bearing Extractor.
Osprey Katari 1.5
$55.00
Ideal for fast rides that require only the water on your back, the Katari 1.5 lets you carry the bare minimum. The high-quality, low-profile design features an included 1.5-liter reservoir that slides into its own exterior pocket with a bite valve that attaches magnetically to a sternum strap. A well-ventilated mesh harness offers exceptional airflow and rolled, soft-edge shoulders provide contoured comfort and stability. In the event you find yourself outside when the sun goes down, a loop for your rear tail light lets you be seen. Made with mountain bikers in mind, but practical for any activity where hydration is a must. LOW-PROFILE CARRY - When carrying water and a few essentials are all that's needed, the Katari/Kitsuma provides a lightweight option that rides close to your back for stability on any trail. RESERVOIR INCLUDED - An Osprey Hydraulics LT 1.5L or 2.5L reservoir keeps you hydrated all day long and stores in an external hydration compartment to protect pack contents from accidental spills. RIDE STABILITY - Our rolled, soft-edged harness contours to the upper shoulders to keep the pack close to your body and provide stability. AIRSCAPE SUSPENSION - Atilon foam framesheet allows dynamic body movement and distributes load across entire backpanel AIRSCAPE BACKPANEL - Ridged airmesh-covered foam with center air channel for excellent ventilation BIOSTRETCH HARNESS - Lightweight, ridged airmesh harness provides ventilated comfort - Rolled, soft-edged harness designed to contour the shoulder providing comfort and stability - Low-profile design with AirScape backpanel and rolled, soft-edged harness for maximum comfort - Dedicated hydration compartment with included Osprey Hydraulics LT 1.5L reservoir by Hydrapak - Magnetic sternum-strap bite-valve attachment - Zippered, scratch-free heat-embossed slash pocket - Loop for blinky-light attachment (light not included)
Ortlieb Bike Shopper Pannier- Black
$114.99
Your spacious one-click shopping bag, the Bike-Shopper Pannier can be quickly attached to and removed from your rack. The flexible market and shopping bag remains stable - also on bumpy roads. The adjustable carrying straps allow it to be carried comfortably on your shoulder (adjusted by push buttons) and will not be in the way during biking. A waterproof Quick-Seal closure provides protection from rain.