Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Accessories

Burley Honey Bee
The hardworking Honey Bee is the perfect balance of value and versatility, without compromising on safety. It features seating for one or two children and includes a 1-Wheel Stroller Kit so you can bike or stroll with the whole family. Share your love for the outdoors with your little ones in the Burley Honey Bee. - Includes 1-Wheel Stroller Kit for quick conversion from biking to strolling - Adjustable ergonomic handlebar fits parents of any height and doubles as an additional roll bar when folded forward in biking mode - Compact fold flattens the trailer for easy storage and transportation - Tinted side windows - 20” push button wheels for quick removal - Hub engaged parking brake
Burley Steel Hitch
$25.00
The Steel Hitch provides the critical connection from your Burley Trailer to your bicycle. The hitch installs easily on the rear skewer of your bike, and then stays attached so the Burley can be connected at any time. If you’d like to swap the Burley from bike to bike, pick up a couple spare hitches and install them on the extra bikes so the hitch doesn’t need to be un-installed when swapping bikes.
Burley Flex Connector Kit (Square Towbar)
$25.99
This part connects the trailer with a square tow bar to the hitch. It attaches inside the tow bar and locks in place inside the hitch using a retaining pin (Standard Forged Hitch & Steel Hitch) or bolt and nut (Classic Hitch). This flexible connector can stretch easily to allow the rider to lay down the bike. Includes safety strap with retaining pin for use with the Standard Forged Hitch or Steel Hitch. If being used with the Classic Hitch the Classic Hitch Safety Strap (part 950067) will also need to be purchased.
Crank Brothers M13 Multi Tool
$25.99
The ultimate trail-side companion. Details - 13 high tensile steel multi-tools, including an integrated tire plug tool - Tire plugs come included with a storage case that mounts directly to the tool - The case can be used to conveniently store chain links Specs - Hex Wrenches: #2, 2.5, 3, 4, 5, 6, 8 - Length: 89mm - Screw Drivers: Phillips #1 & #2, flat #1 - Specialty Tools: Tire plug tool, tire plugs - Torx: T-10, T-25 - Warranty: Lifetime - Weight: 164g
Crank Brothers M20 Multi Tool
$39.99
The ultimate trail-side companion. Details - 20 high tensile steel multi-tools, including an integrated tire plug tool - Tire plugs come included with a storage case that mounts directly to the tool - The case can be used to conveniently store chain links Specs - Chain Tool: 8/9/10/11/12 speed compatible - Hex Wrenches: #2, 2.5, 3, 4, 5, 6, 8 - Length: 89mm - Open Wrench: 8mm - Screw Drivers: Phillips #1 & #2, flat #1 - Specialty Tools: Tire plug tool, tire plugs, valve core removal tool, rotor straightener - Spoke Wrench: #0, 1, 2 - Torx: T-10, T-25 - Warranty: Lifetime - Weight: 203g
CushCore Bead Dropper
$22.00
The Bead Dropper tire tool significantly helps in removal and installation of CushCore tire inserts, especially the critical step of dropping the bead into the rim channel. - Rubberized ergonomic handle - Unique "thumb flange" makes it easy to apply pressure to the tire bead - Sturdy, durable plastic lever—strong enough for DH tires, yet won't scratch your rims - Lifetime warranty
Cycle Alaska Cycle Alaska Koozie Green
$7.50
Cycle Alaska Koozie Green
Cycle Alaska Cycle Alaska Koozie Smoke
$7.50
Cycle Alaska Koozie Smoke
Cycle Alaska Cycle Alaska Water Bottle 21 oz.
$9.99
Cycle Alaska Water Bottle 21 oz. Clear with red Lid
Cycle Alaska Cycle Alaska Water Bottle 26 oz.
$12.99
Cycle Alaska Water Bottle 26 oz. Clear with Red Cap
Cycle Alaska Cycle Alaska Stainless Steel Pint
$13.00
Cycle Alaska Stainless Steel Pint
Delta El Greco Ceiling Hoist
$23.99 $39.99 40% Off
- Easily holds a bike, kayak, or ladder - Efficient pulley system helps you lift and lower heavier objects - Auto-locking mechanism prevents accidental release - Engineered for durability with tough silver powder coat finish - Includes mounting hardware and full instructions - Maximum load: 50lbs
Delta Bkin Light Set
$34.99
Be Safe, Be Seen Be noticed day or night with Bkin, the smart personal safety light that delivers ultra-bright day/night visibility in a lightweight, compact design. Features - Safety First: The Bkin's specially-engineered lens keeps you safe and visible day or night, with visibility of 1,000 feet in daylight and 3,000 feet at night. With 120 degrees of ultra-wide light dispersion, the Bkin is the perfect safety light for runners and dog walkers. - Multiple Light Modes: Your Bkin features three (3) light modes - pulsing, constant and SmartMotion, all accessed with the push of one button. Customize your personal safety light needs from dusk to dawn. - Motion Activated: LED SmartMotion takes the guesswork out of safety. Conserve battery life with motion-sense technology and auto-off functionality. Your safety is one less thing to worry about. - Integrated USB: Charge from your computer or any device with a USB port - no need for additional wires OR the hassle of replacing batteries. Up to 20+ hours of use on a single charge. - Easily Mounted: Clip the Bkin on to your favorite running gear, backpack, dog's collar, bicycle, or stroller with included mount. Super lightweight, the Bkin provides power and security in an ultra-compact device.
Delta Smartphone Holder XL
$36.99
Instant bike dashboard Perfect for any enthusiast, Delta's bicycle phone mount allows you to securely display your mobile device while riding. Using a built-in lock mechanism, your plus-sized smartphone is secured safely with multiple grip points and bumpers, to prevent shock and reduce vibration on rough terrain. Adjust the angle of display for convenient viewing while riding to easily access navigation, answer that important call or stop for the perfect photo opportunity. Features Securely Displayed - Weatherproof bungee and rubber inserts keep phone secure and protected while Delta's patented cam lock provides added security for your mobile phone on rough terrain. Compatibility - Bicycle mobile phone mount compatible with phones 3.5 inch wide x 0.5 inch depth x 7.8 inch length (up to iPhone 8+ Plus and Samsung Galaxy 9+ plus). Easily Accessible - Sliding system allows for easy in and out while on the go, so your phone is available for an important call, adjusting navigation, and you'll never have to miss the perfect photo opportunity. Quality Construction - Designed for road cycling, your mobile phone is fully enclosed and securely mounted in place with a built-in locking mechanism. Precision-engineered design grips your device, providing ease-of-mind on the roughest terrain. Multiple Mounting Options - Included handlebar and stem cap mounts allow you to position your mobile phone in your desired location. Securely mounts to handlebar diameters up to 1 3/8" / 35 mm Weight - 0.17 lbs / 80 grams
Dimension Safety Flag
$18.75
Dimension Safety Flags offer higher visibility for riders. - Perfect for bikes, trailers, recumbents - Two-piece connecting rod - Assembled Flag Height: 51.75 inches
Dumonde Tech Lite Chain Lubricant
Dumonde's standard LITE chain lube is a liquid plastic and through polymerization forms long-lasting plating on all chain surfaces.
FOX High Pressure Shock Pump
$35.00
High Pressure Shock Pumps to maintain your shock and seat post air pressure. - Max. pressure 350PSI covers all shocks (350PSI is the max psi on DPS and DPX2) - Durable stainless swivel pump head (UP-SA) allows for pump to access shocks where linkages would get in the way with a traditional pump head - 6063 alum barrel and handle - Micro-adjust 2-3 PSI air-bleeder - Foldable hose
Finish Line Wet Lubricant
$9.99
For extreme conditions, you need an extreme lube. That's when you grab Finish Line's Wet Lubricant. It's ultra water-resistant and long-lasting thanks to its special formulation of synthetic oils, special polymers and anti-wear additives. This lube delivers superb drivetrain lubrication and protection and it's the ultimate choice for muddy off-road rides, all-day epics and long, rainy commutes. - Formulated with high viscosity synthetic oils, water repelling polymers, and advanced anti-wear additives - Will require more attention to drivetrain cleanliness, but delivers the ultimate in lubricity and protection - Upon application, wipe excess off chain to minimize attraction of dirt and grime - Finish Line's Wet Lubricant delivers the ultimate in lubricity and protection. It requires a little more attention to drivetrain cleanliness compared to Finish Line's Dry or Wax lubes.
Greenfield KS2 Kickstand
$12.99
Greenfield's Kickstand attaches quickly and easily to most bicycles and provides a safe and convenient way to park your bikes at home and on the road and trail. It's also durable, lightweight, and looks great on any bike. Plus, it's made of a special non-corrosive aluminum and is built to last. You'll want one on all your bikes! - 285mm (for bikes 22" and under), 305mm (for bikes 22" and over) - For bikes without factory mounting plate (includes top plate and bolt) - Certified Non-Corrosive Casting - Snap Action Mechanism - Non-Slip Clamping Surface
Handle Stash Handle Stash
Shock absorbing bike cup holder Never lose a drink again! Stress tested on the harshest roads and trails.
Incredibell Gear Bell
$13.00
A steampunk statement for your handlebars. A transparent dome lets colorful gear workings of the insides of the bell be seen. The Gear Bell is even rainproof.
KS Post Paste
$10.00
- Grease for periodic maintenance of suspension/dropper seatposts - Works well on most shocks and forks
Lezyne Classic Pedal Rod
$27.99
Lezyne's Classic Pedal Rod is designed for heavy-duty use. Featuring two 15mm wrench openings with optimally positioned offsets, this wrench will loosen any pedal from its crank. The handle is made of varnished wood for strength and stylish good looks and there's an included bottle opener. Hang this beauty on your wall for all future pedal changes.
Muc-Off Drivetrain Cleaner
$24.99
- Fast and effective grease-cutting formula - Removes all chain oil and wax residue - Safely eliminates drive chain contaminants - Biodegradable - Ideal for use with chain cleaning devices - Trigger spray included for easy application on cassettes, chainrings and derailleurs - Safe for metal, plastic, rubber and seals
Muc-Off Punk Powder
$29.99
- Fast action bike cleaner - Readily biodegradable ingredients - Reduced carbon footprint with 94% less packaging - 100% plastic free packaging, 100% water free, 100% environmentally friendly ingredients, including plant based raw materials - Supplied in a compostable sachet and printed with vegetable inks - FSC recycled card box - Re-fill your old bottle and help reduce plastic waste - Dissolves easily in any type of water. Cold, warm and hot. Hard or soft - Safe to use all over the bike - Alkaline based and free from alcohol, CFCs, (EDTA), solvents or acids - Vegan & vegetarian friendly - -01: 4 sachets, 30g each - -02: Power Bundle: 4 sachets, 1x aluminum bottle, 1x bike clener spray trigger, 1x Silicon base for aluminum bottle
Muc-Off Drivetrain Cleaner
$99.99
The Muc-Off Bio Drivetrain Cleaner is a complete drivetrain cleaning solution that can either be poured into a chain cleaning device or sprayed directly to your chain rings, rear cassettes and derailleurs to clean your entire drivetrain within seconds. It's also fully biodegradable and safe for metal, plastic, rubber and seals.
Mucky Nutz Butt Fender
$13.99
- Attaches to saddle rails - Quick and easy to install and remove - Fat Butt, a wider version for fatbike applications - Road/CX narrower for road and cross bike applications
Mucky Nutz Fat Face Fender XL-black
$21.99
The Face Fender designed to fit fat bike forks. Stops any muck, sand or snow being flung into rider's face. Front fender not only protects the rider, but also protects the fork crown from getting caked, reducing the need for cleaning and servicing Uses Velcro straps to attach to the fork, making fitting and removal a breeze Can be used as a rear guard on some arrangements Easy to clean as it's flexible and opens flat to simply wipe clean Material: Customized Polypropylene Compatible with most rigid fatbike forks
ONE Industries EDC Pump
$59.99
The EDC Pump offers a unique storage solution integrated into a high volume pump. It is designed to integrate with the EDC Tool System, CO2 canister or your favorite stash. Crafted from aluminum with a durable textured machined finish. A mini pump might look appealing, but with typical volumes of 30-60cc it will take hundreds of strokes to inflate a new tube and has absolutely no chance of re-inflating a tubeless setup. When you get a flat, you want to fix it as fast as possible as riding time is precious. At 100cc and at 160g our high volume pump has the highest volume to weight ratio on the market. Weight: 135g - 70cc, 160g - 100cc (without EDC tool system)
Ortlieb Back-Roller Classic (pair)
$200.00
Durable polyester fabric make this pannier a long lasting touring companion. The waterproof roll closure ensures safe and waterproof storage of food and equipment. With its QL2.1 fixing it is quickly mounted and taken off the bike rack. A shoulder strap provides carrying comfort when taken off the rack. - Classical rear pannier (pair) with roll closure - Sides of PS 490 nylon material, front and back of PD 620 - QL2.1 system for racks up to 16 mm - 20 mm hook available as separate accessory (e.g. for e-bikes) - Including reduction pieces for tube diameters 8, 10 and 12 mm; with anti-scratch function reducing abrasions on rack - Top QL hooks and lower sliding hook adjustable without requiring any tools - Lower hook rail made of two-component "hard-soft" synthetic reduces abrasions on carrier - Including integrated inner pocket and shoulder strap - Can be used individually (e.g. for shopping, sports, picknick) - Can be combined with the ORTLIEB Rack-Pack size S or M - Highly reflective Scotchlite reflector - Easy to clean inside - Optional accessories: ORTLIEB carrying system, outer pockets (size S), mesh pocket, bottle cage, 20 mm QL2.1 hook, anti-theft device long - Note: In order to meet standard IP64 (6=dustproof, 4=protected against splash water coming from all directions) the closure must be rolled 3-4 times.
PDW Bar-ista Coffee Cup Holder
$11.40 $19.00 40% Off
Sometimes you don't want to leave your cup of joe at home. Enter: Portland Design Works' Bar-ista to keep your morning beverage within easy reach. This handy accessory fits most travel mugs and attaches to 26.0mm handlebars. Drop in your travel mug (with a good lid to avoid splash stains) and enjoy the ride. - Constructed of 5052 alloy and lined with rubber to better grip travel mugs - Weight: 71g (2.5 ounces) - Dimensions: 8cm (3.125") diameter at top, tapering to 7.5cm (2.95") at bottom - Lifetime PDWarranty
Park Tool Super Patch Kit
$3.99
The Super Patch Kit is comprised of a small plastic case, a piece of sandpaper for roughing up the tube and 6 peel-and-stick patches so no gluing is required. The patches stick fast thanks to 3M technology and they're thin and flexy to stretch with the tube. There's no easier way to patch a tube.
Park Tool Cassette Lockring Tool
$8.95
Heat-treated alloy tool steel, one inch base fits wrench or bench vise. Thin-wall construction allows use without removal of cones and locknuts. The FR-5 has 12 splines that are approximately 23.4mm across. - Fits Shimano, SRAM, Sunrace, Suntour, Chris King and other cassette lockrings - Fits the SRAM XX1 11-speed cassettes - Also fits Shimano disc brake lockrings - Always use a quick-release skewer to hold the tool in place and snug to cogs when loosening; for solid axles, use the axle nut
Park Tool Shop Cone Wrench
$9.95 - $9.99
Park's Cone Wrenches are made of durable tool steel and are nice and thin to fit on the small-clearance cones found on hubs and other bearing assemblies. Plus, they work as regular wrenches, too. They feature Park's special Y heads that put more material where it's needed for excellent durability and strength. Most applications require at least 2 cone wrenches. If you have questions please contact us and we can recommend the correct sizes for your needs.
Park Tool Compact Crank Puller
$19.99
Park's Compact Crank Puller is used to remove Shimano Octalink, ISIS Drive and square-taper cranksets. It includes 2 rotating tips (16.3 and 11.3mm) to make the job easy. This is a great tool for your travel and home tool kit.
Park Tool BBT-22 Bottom Bracket Tool
$20.95
The BBT-22 is a shop-quality tool for installing and removing Shimano and ISIS Drive splined 20-tooth bottom bracket cups. Made from investment-cast steel, the BBT-22 ensures maximum engagement with the bottom bracket cup. It can be used with a 3/8-inch drive torque wrench, a 3/8-inch ratchet driver, a 32mm wrench, the Park FRW-1 Freewheel Remover Wrench (sold separately), or a 1-inch wrench.
Park Tool Mini Chain Brute Chain Tool
$20.95
Park's Mini Chain Brute Chain Tool goes anywhere and features a V-shaped handle, a super-strong replaceable pin, and fine threads to make chain removal and installation a breeze. The CT-5 works on any derailleur chain, including Shimano Hyperglide and 9-, 10-, and 11-speed. It works for loosening tight links, too.
Park Tool LRT-3 Lockring Tool
$24.95
Designed and built to remove and install the direct mount lockring that retains front chainrings found on some Specialized, Cannondale and FSA modular cranks. - Fits chainring of Specialized, Cannondale and FSA - For lockrings with 47–48mm outside diameter and 4 or 8 notches - Fits both 4 notch (FSA and Cannondale) and 8 notch (Specialized) lockrings - 36mm hex drive to be used with Park Tool TWB-36 Crow Foot and a torque wrench to properly measure torque - Constructed of 4140 heat-treated steel and plated for long life
Park Tool Bottom Bracket Wrench (External Bearing)
$27.95
The Bottom Bracket Wrench removes and installs Shimano Hollowtech II, Race Face X-type, FSA MegaExo, Campagnolo Ultra-Torque and TruVativ Giga X-pipe bottom brackets. Laser cut for a precise fit, one end of the BBT-9 securely engages the 16 cup notches, while the other end engages the 8 internal splines of the crankarm adjustment cap.
Park Tool Sprocket Remover / Chain Whip
$29.95
This combination chain whip and freewheel / lockring remover wrench is heat treated to prevent bending and flexing, with a molded handle for comfort. - 3/32-inch model Works on 5- to 12-speed cassettes and freewheels - 1/8-inch model works on 1/8-inch chains and sprockets - 1-inch (25.4mm) box-end wrench fits Park Tool Freewheel/Cassette Lockring Tools - Features hardened pins to keep the chain in place
Park Tool Home Mechanic Floor Pump PFP-8
$49.99
Easy to use, powerful, durable and economical, Park Tool's PFP-8 Home Mechanic's Floor Pump has a place in every garage and home bike shop and is perfect to take along to cycling events, too! It inflates like a champ thanks to its sturdy steel barrel, tough handle, composite thumblock head that fits Presta and Schrader valves, sturdy steel base, long hose and extra-large, easy-to-read gauge.
Park Tool CP-1.2 Cassette Pliers
$51.95
Secure engagement, easy to use, and fast! The CP-1.2 quickly grips cogs from 9 to 24 teeth with no manual adjustments. A great shop tool, the CP-1.2 is 13.7-inches (35cm) long and can be used with one hand to hold any 5-speed to 12-speed road or mountain cassette solidly during lock ring removal. Forged steel construction with a spring loaded return and comfortable dual density grips.
Park Tool PCS-9.3 Home Mechanic Repair Stand
$219.95
"The PCS-9.3 is a basic folding bicycle workstand designed and built for the home mechanic – a stable way to hold nearly any bike off the ground for adjustments, cleaning and repair. Features 18"" (460 mm) of height adjustment and 360 degrees of clamp rotation, positioning all parts of the bike within reach for any mechanic whether seated or standing. The stand's all-steel construction with teardrop-shaped tubing ensures maximum rigidity and stability, with a locking support yoke and upgraded internals for extra dependability. The PCS-9.3 is able to hold up to 80 lbs. (36 kg), which allows for compatibility with virtually all two-wheeled pedal-driven bicycles, including fat bikes and most e-bikes.* The PCS-9.3 quickly folds down for storage and transport with a smooth-operating leg support system that pulls both legs up in one simple motion. The PCS-9.3 is the perfect way to upgrade your home shop. NOTE: The maximum weight capacity of the PCS-9.3 assumes the weight is centered below the clamp and between the legs.? - Fully adjustable clamp fits 7/8"" to 3"" (22 mm–76 mm) diameter tubes and seat posts of any shape and material, including aero posts and dropper posts - Narrow clamping jaws (2.7""/70 mm) fit into tight areas or on short seat posts - Durable textured powder coat finish - Maximum weight capacity: 80 lbs. (36 kg) - Height adjustable from 39"" to 57"" (990 mm–1450 mm) - Base when open forms a triangle of 36"" x 36"" x 48"" (920 mm x 920 mm x 1210 mm) - Folds down to 44"" x 14.5"" (1140 mm x 370 mm) - Weight: 16 lbs. (7.2 kg) - #2848A quick-release collar with accessory pods required for use of PTH-1 Paper Towel Holder or 106 Work Tray"
Park Tool Head Tube Reaming and Facing Set (33.8mm reamer)
$549.99
Proper frame preparation is very important. Park Tool's Head Tube Reaming and Facing Set (33.8mm reamer) combines reaming and facing of the head tube to create a perfect fit for most sizes of head cups. The HTR-1B comes with a reamer of 33.9mm for the 1-1/8 inch headset standard. Includes: • 33.9mm reamer (part #754.2), and four different size pilots (29.8mm, 30.0mm, 33.8mm, and 36.8mm) • 690 Facer • Quick-release, quick-adjust feature: bottom portion slides off and on easily without threading SHIS terminology: The HTR-1B as stock will face frames of EC29, EC30, EC34 and EC37. It will ream frames of EC34. Accessories will allow service in other standards.
Pedro's Tire Levers
$4.50
The tire lever, though seemingly one of the simplest and most basic of cycling tools, is one commonly used by almost every cyclist, and unfortunately, one often responsible for unnecessary frustration. Really, what is more fun than flatting far away from home, being thrilled you lugged that spare tube and pump, and then having your tire levers snap in two? Pedro's award-winning, universally loved tire levers feature molded box construction and a proprietary plastic composite blend that makes them the strongest levers available. The unique chisel tip shape easily inserts beneath the tire bead and the slightly thicker shape keeps the lever securely in place. Additionally, the bold shape of the lever and helpful dual spoke hooks makes removal of even the tightest tires a simple task. - Award-winning and universally loved - Molded box construction and proprietary plastic blend makes these the strongest levers available - Chisel tip shape is easy to insert beneath the bead and the slightly thicker shape keeps the tire lever from slipping - Bold shape makes it easy to remove the tightest of tires without bending or breaking
Planet Bike SpeedEZ Fenders (Road)
$54.99
Planet Bike's SpeedEZ Fenders keep you dry in wet weather and are easily removed when the sun comes out. Made from nearly indestructible Superflex polycarbonate and rustproof stainless-steel stays, these fenders also utilize a clever, pre-installed attachment system so you can mount and remove them in seconds.
Planet Bike Hardcore Fenders (ATB)
$59.99
Turn your mountain bike into an all-weather vehicle with Planet Bike's Hardcore Fenders. Made of unbreakable Superflex polycarbonate with stainless-steel stays, they're ultra tough. They boast mudflaps for the ultimate in splash and spray protection and the front fender has release tabs for easy on/off. Plus, the hardware is pre-installed for quick mounting.
Planet Bike Hardcore Fenders (Road)
$59.99
Turn your bike into an all-weather vehicle with Planet Bike's Hardcore Fenders. Made of unbreakable Superflex polycarbonate with stainless-steel stays, they're ultra tough. They boast mudflaps for the ultimate in splash and spray protection and the front fender has release tabs for easy on/off. Plus, the hardware is pre-installed for quick mounting.
Pro Touring Minipump
$12.99
• Lightweight and compact mini pump • For both schrader and presta valves • Maximum pressure up to 11Bar / 160PSI • Magnet lock system • Glass fiber reinforced Nylon material • Colour: Black
Pro Bike Stand (700c/29-inch)
$39.99
• For quick and simple parking or displaying of your bike • Durable and rigid design • Fits any model of bike with 700c or 29-inch wheels • Color: Black
RaceFace Stash Tool Wrap
$21.99
Free Your Pockets Why carry your tools yourself? Strap them to your bike and forget about them until you actually need them. Enough room for a CO2 cartridge, a small selection of tools + tire levers, and a spare tube. - Stretch hook-and-loop strap adjustment - Ripstop nylon construction - Printed silicone grip - Tri-fold design - 3 inner pockets
RockShox Parker O-lube
$5.00
Recommended by RockShox for shock rebuilds. • Rear shock seals lubricant • 2g tube
RockShox Air Can Service Kit
$18.00 - $19.00
• Service kits include air can seals and wiper • Available for RockShox air rear shocks--Ario, Monarch, Monarch RT3, DebonAir and Monarch Plus
RockShox Fork Service Kit
$42.00
Service kits include dust seals, foam rings, oil seals, air and damper o-rings needed for basic service.
RockShox Deluxe 200 Hour/1 Year Service Kit
$65.00
- 200 Hour/1 Year Service Kit for Deluxe/Deluxe Remote A1-B2 (2017-2020)/Deluxe Nude B1+ (2019+) - Includes Air Can Seals, Piston seal, Glide Rings, IFP Seals, Remote Spares
SKS Pump Adapter with Chain
$9.99
Easily adapts schrader only air compressors, floor pumps, and mini pumps to work with presta valves
SKS B53 Commuter II
$34.99 - $40.99
Stay clean and dry with SKS's Commuter II fenders! The stainless-steel hardware comes pre-installed for quick and easy mounting.
SRAM eTap Battery
$59.00
SRAM eTap Battery is the power source for the eTap system. The same power unit is interchangeable between front and rear derailleurs. - Up to 1000 kilometers of riding per charge - Weight: 24g - Finish: Black - Compatibility: SRAM RED eTap
Salsa Anything Bracket with Strap and Pack
$49.99
Designed with minimalist riding in mind, the Anything Bracket mounts to standard or Three-Pack frame bosses and works directly with the Anything Pack, allowing you to carry essential items on the bike. - Combines placement of the Anything Pack and standard water bottle cage in a single location - Mounts to standard or Three-Pack bosses on forks and frames - Bracket is constructed of lightweight 6061-T6 aluminum - Includes Anything Pack, mounting hardware and strap - Anything Pack features a roll-top closure for easy access
Saris Leveling Block
$17.49 $24.99 30% Off
The Saris Leveling Block keeps your bike level with your trainer. - Adds stability to your training ride. - For use with any rear wheel-mounted trainer. - Raises front bicycle tire 1.1 inches (2.8 cm) off the ground
Page 1 of 2 Next page