Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes
  • Show More Model Years
  • Show Fewer Model Years

Accessories

$24.95
Designed and built to remove and install the direct mount lockring that retains front chainrings found on some Specialized, Cannondale and FSA modular cranks. - Fits chainring of Specialized, Cannondale and FSA - For lockrings with 47–48mm outside diameter and 4 or 8 notches - Fits both 4 notch (FSA and Cannondale) and 8 notch (Specialized) lockrings - 36mm hex drive to be used with Park Tool TWB-36 Crow Foot and a torque wrench to properly measure torque - Constructed of 4140 heat-treated steel and plated for long life
$23.00
Zipp delivers an uncomplicated computer mount for aerobar extensions that’s easy to install, lightweight, and vibration and slip free. The 22.3mm industry standard mount installs simply and securely on aero extensions. The Zipp QuickView TT Computer Mount is aerodynamically shaped for left-side installation, but also can be installed on the right bar extension. It comes with a single Torx T25 bolt, flexible mounting clamp, and a quarter-twist mount.
$42.00
Service kits include dust seals, foam rings, oil seals, air and damper o-rings needed for basic service.
$16.00
Keep your brakes performing at their best with Avid's DOT 5.1 Brake Fluid. They're compatible with all Avid disc brake seals. You'll get a 4-ounce bottle of fluid.
$25.00
The TRY-1 Parts and Beverage Tray is twelve inches in diameter, looks great on the workbench and will carefully hold anything from derailleurs to tallboy cans to pint glasses. It has a tacky surface coating that will keep objects from sliding around and can easily switch from business to party by placing your favorite beverage on its no-slip surface.
$29.99
Cutting hydraulic brake lines is quick, easy and precise with Jagwire's Sport Hydraulic Brake Line Cutter. The hand-held design makes it possible to expertly cut hydraulic lines on the workbench and on your bike.
$15.99
Bontrager's TTX Repair Stand Adapter safely and securely holds your Trek TTX bicycle in any clamp-style and screw-type repair stand (sold separately).
$52.99
A shop grade floor stand that adjusts to any wheel size. - Extremely adjustable to securely hold any wheel size - Wide base with triangulated arms hold bikes firmly - Easy in-out for practical store use - Dimensions: 22 x 15 x 17" (560 x 380 x 430mm) - Tool-free adjustment with thumb screws - Rubberized feet protect floors
$13.00
A steampunk statement for your handlebars. A transparent dome lets colorful gear workings of the insides of the bell be seen. The Gear Bell is even rainproof.
$10.99
Genuine replacement parts. Keep your bike operating as it should. Details: - Original replacement knobs for mounting Trek training wheels. - Allows for tool-free installation, adjustment, and removal of training wheels. - Sold as a pair
$3.99
The Super Patch Kit is comprised of a small plastic case, a piece of sandpaper for roughing up the tube and 6 peel-and-stick patches so no gluing is required. The patches stick fast thanks to 3M technology and they're thin and flexy to stretch with the tube. There's no easier way to patch a tube.
$59.99
Turn your mountain bike into an all-weather vehicle with Planet Bike's Hardcore Fenders. Made of unbreakable Superflex polycarbonate with stainless-steel stays, they're ultra tough. They boast mudflaps for the ultimate in splash and spray protection and the front fender has release tabs for easy on/off. Plus, the hardware is pre-installed for quick mounting.
$11.99
• Updated to fit better in the hand with a more rounded, smoother shape • The precision sized SW-7.2 fits the three most popular spoke nipple sizes on the market • Nickel plated for years of service • Designed for the home mechanic. FIts the following size spoke nipples: • .127" (3.23mm) • .130" (3.30mm) • .136" (3.45mm)
$19.99
The ultimate trailside companion. These high tensile steel multi-tools feature a precise fit and finish and side grips for a secure handhold even with gloves on. The m10 includes: Hex wrenches: #2, 2.5, 3, 4, 5, 6, 8 Screwdrivers: Phillips #2, flat #2 Torx: t-25 Length: 89 mm Weight: 124g Warranty: Lifetime
$20.00
- 5 DART plugs for use with the Stan's NoTubes DART tool
$25.00
Stan's Dual Action Repair for Tubeless (DART) fixes damaged tires faster, easier, and better than existing plug tools. While traditional tire plugs try to wedge rubber strips into a puncture, the DART creates a chemical reaction with your Stan's sealant to quickly form a permanent airtight bond. The DART's plastic tip is barbed to anchor firmly in place and stay put during even the most aggressive riding while being safer for rims, rim tape, and your hands. The material of the DART is also more flexible, and its laser-cut shape is optimized to contour to the shape of different punctures, maximizing surface area to increase the sealing reaction. Because the DART anchors to your tire and creates an instant bond with your sealant, it also won't pull out while riding the way a conventional plug can. One of the best features of the DART's design is that it doesn't require trimming once inserted, and excess material won't get in the way of your ride. DARTs can't be felt while riding, even on road tires, and they wear smooth naturally. - Repairs large punctures and slices - Reacts with Stan's sealant to form an instant, airtight seal - Barbed plastic tip anchors into tire and will not pull out when riding - Flexible material and laser-cut shape conforms to puncture and bonds with sealant - Wears off clean, no trimming needed, and can not be felt while riding, even on road tires - Lightweight, compact tool fits the shape of your hand for more precise use and includes built-in valve core remover - Includes two pre-loaded DARTs for sealing multiple and larger punctures - Clear caps keep DARTs clean and unthread quickly for fast deployment - Simple and easy to refill
$25.00
The Steel Hitch provides the critical connection from your Burley Trailer to your bicycle. The hitch installs easily on the rear skewer of your bike, and then stays attached so the Burley can be connected at any time. If you’d like to swap the Burley from bike to bike, pick up a couple spare hitches and install them on the extra bikes so the hitch doesn’t need to be un-installed when swapping bikes.
$9.95
Heat-treated alloy tool steel, one inch base fits wrench or bench vise. Thin-wall construction allows use without removal of cones and locknuts. The FR-5 has 12 splines that are approximately 23.4mm across. - Fits Shimano, SRAM, Sunrace, Suntour, Chris King and other cassette lockrings - Fits the SRAM XX1 11-speed cassettes - Also fits Shimano disc brake lockrings - Always use a quick-release skewer to hold the tool in place and snug to cogs when loosening; for solid axles, use the axle nut
$59.99
Turn your bike into an all-weather vehicle with Planet Bike's Hardcore Fenders. Made of unbreakable Superflex polycarbonate with stainless-steel stays, they're ultra tough. They boast mudflaps for the ultimate in splash and spray protection and the front fender has release tabs for easy on/off. Plus, the hardware is pre-installed for quick mounting.
$39.99
Small but powerful The Ion 100 R is daytime visible and designed for the city. A wide beam spread, focused optics, and an interruptive flash pattern make it visible from over 500m during the day. A built in ambient light sensor provides auto-brightness control, and the included Quick Connect bracket offers simple removal for recharging via the included USB cable. - Focused optics provide be seen safety with a broad but powerful light - Integrated light sensor auto-adjusts brightness in flash mode - 100 Lumens via high-power CREE LED - Ideal for handlebar or on bike mount - 100LM-1.5hrs, 50LM-3hrs,5LM-16hrs, Night Flash-7hrs, Day Flash-5hrs - Includes quick connect bracket and micro USB charging cable - Blendr compatible, secure bar mount available
$59.99
• Folds small and is lightweight for easy mobility • Holds bikes by rear axle with soft rubber-dipped fingers • Fits variety bikes with 20" – 29" tires, and is compatible with most disc brakes.
$20.99
Get the most from your Bontrager Switch Lever thru axle system. Product details - Original equipment replacement lever for Bontrager Switch Flip thru axles - Can be kept inside the thru axle or left off the bike to save weight - Lever is held securely by internal O-ring on the thru axle
$14.95
Park Tool introduced the bicycle world to the 3-way hex wrench set over 30 years ago. Our 3-way wrenches fit perfectly in the palm of the hand and provide excellent leverage, making them a favorite of countless shop mechanics worldwide. AWS-1 FEATURES - 4mm, 5mm, and 6mm hex set - Wrenches made from industrial tool steel, through hardened and tempered for long life - Chamfered tips for a perfect fit
$54.99
Planet Bike's SpeedEZ Fenders keep you dry in wet weather and are easily removed when the sun comes out. Made from nearly indestructible Superflex polycarbonate and rustproof stainless-steel stays, these fenders also utilize a clever, pre-installed attachment system so you can mount and remove them in seconds.
$18.00 - $21.00
• Service kits include air can seals and wiper • Available for RockShox air rear shocks--Ario, Monarch, Monarch RT3, DebonAir and Monarch Plus
$9.99
Dangle them under the saddle, use them like key chains, or whatever you could think of. Grab one for your bike, safety first. *Assorted Colors = Randomly picked by our staff when purchased. MADE IN JAPAN About 5cm, Key Chain Size!
$27.95
Precisely machined for a perfect fit, this 8-notch tool removes and installs the lockring that retains front chainrings found on Bosch Gen 2 e-bike motors after the crank arm is removed. - Fits Bosch Active Line (chainrings less than 20 teeth), Performance Line and Performance Line CX models - For lockrings with 50mm outside diameter and 8 notches - Replacement for Bosch 0275009003 tool - Torque wrench compatible 3/8-inch square drive - Constructed of 4140 heat treated steel and plated for long life
$59.99
Adapts a thru axle hub bike for a Saris bike trainer. - Trainer Thru Axle Adapter For Saris Trainers - Thread pitch: 1.00 & 1.75 What's Included: - Thru axle - Washers - Endcaps with bolts Trainer Compatibility The Saris Trainer Thru Axle Adapter is designed for indoor use on Saris trainers only and should not be ridden outdoors. Compatible with current basic trainers. Not compatible with CycleOps PowerSync trainers. Contact us with trainer compatibility questions. Bike Compatibility Many bike manufacturers do not publish thread pitch or hub spacing online. If you are unclear as to what type of thru axle your bike uses, please contact us.
$79.99
Protects your floor from sweat and bike grime. Product Features: - Protects your floor from sweat and bike grime. - Keeps your trainer from "walking" during intense workouts. - Durable construction absorbs vibration and noise. - Training mat measures 65 x 36 inches. - Black PVC foam gives the training mat superior sound absorption. - Resistant to moisture, and easy to clean with soap and water when necessary.
$71.99
A high-volume under-the-seat bag and water bottle pocket designed specifically for the gran fondo cyclist. Every Seymour bag is created using Oceanweave – Axiom’s new lightweight and durable fabric made from reclaimed fishnet – to help reduce the amount of harmful plastics in our oceans. CONSTRUCTION - OCEANWEAVE 600D recycled fishnet polyester with waterproof polyurethane coating - Red interior liner improves internal visibility MOUNTING SYSTEM - Lightweight Velcro saddle-mounting system ADDED BENEFIT - Zippered flap opening for easy access to bag contents while bag is on bike - Interior credit card / ID pocket - Integrated waterbottle holder - Ultra-visible 3M triangle logo - LED light clip - Volume 1.3 L / 79 cu in - Weight 126g / 0.28 lbs