Filter By:
- Bar Ends (1)
- BMX (2)
- Bottom Brackets (10)
- Brakes/Levers/Pads (32)
- Cables (8)
- Cassettes/Freewheels (20)
- Chainrings (14)
- Chains (8)
- Show More Categories
- Cranksets (8)
- Derailleurs (15)
- Forks (1)
- Handlebar Grips/Tape (12)
- Handlebars (1)
- Headsets (6)
- Pedals (8)
- Saddles (5)
- Seatposts (2)
- Shifters (12)
- Stems (4)
- Other (72)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Parts

$1.65
- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension
- Uses standard chain pin connector and tool

$2.25
- Allows quick chain removal without tools
- MissingLink 410HD|~|1sp|~|BMX Heavy Duty chain|~|9.4mm|~|each|~|
- MissingLink 410|~|1sp|~|BMX|~|8.6mm|~|each|~|
- MissingLink II|~|8sp|~|all|~|7.1mm|~|6/card|~|
- MissingLink-9|~|9sp|~|all|~|6.6mm|~|6/card|~|
- MissingLink-10R|~|10sp|~|KMC, Shimano, SRAM|~|5.9mm|~|6/card|~|
- MissingLink-10CR|~|10sp|~|Campagnolo only|~|5.9mm|~|6/card|~|
- MissingLink-11|~|11sp|~|Campy, KMC, Shimano|~|5.5mm|~|6/card|~|

$2.50
$9.99
75% Off
One of the things that tires you out when you're riding on the road is vibration from rough pavement. Bontrager's Bzzzkill Harmonic Dampers go inside your handlebar ends and utilize harmonic damper technology to cancel these high-frequency vibrations so you don't feel them and can ride more comfortably. The Bzzzkills have small weights held between elastomers. When you're riding over rough roads, the elastomers delay the oscillation of the weights, canceling the vibrations so you don't feel them.

$4.00
A new stet of post keys for your RockShox Reverb tightens up any rotational slop that may develop normally with use.
- Fits all generations of Reverb and Reverb Stealth
- Brass Key sizes are defined by the number of lines on the key. (Zero lines means a "Size 0" key, 3 lines means a "Size 3" key.)

$4.40
Power Links provide tool free chain assembly.
- 8-speed width: 7.1mm
- 9-speed width: 6.8mm
- Chain Compatibility: SRAM
- Reusable: Yes

$4.40
These are the correct connecting links for SRAM's 12-speed Eagle chains. They are great for installing new chains and fixing chains on the road and trail, too. They come in a four pack, for use with four chains.

$4.99
The Problem Solvers Cassette Spacers are made of light and durable anodized aluminum and come in different thicknesses for correctly spacing various brand and model cassette cogs. Measure and match your spacers to choose the right width.

$6.00
Tight tolerances and precise torque specs mean precision parts like this MegaExo 12 Left Arm Crank Bolt need to be replaced from time to time. Make sure the heart of your drivetrain is secure, and pick up a spare or two today.

$6.00
KMC Missing Link connectors are for use on new chains or to keep in your seat bag for an emergency repairs.
- Compatible with KMC and Shimano 10-speed chains
- Includes 2 pairs

$7.49
Notched binder bolts for frames with integrated seat collars.
Details:
CroMoly steel bolts
Three lengths available: 16, 19 and 21mm
8mm diameter

$8.00
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity
- No retainer means these bearings have 40 percent more capacity

$8.00
Replacement Remote-end Hose Barb for RockShox Reverb dropper seatposts.
- Fits all generations of Reverb

$8.99
The Eagle 2 is a revolutionary pad that first utilized the hardened reinforced steel internal backbone. This larger pad has been used in all areas of cycling and is a good choice when frame, wheel and fork design allow.
Features:
- Hardened and Plated reinforced steel backbone
- Patented Angled tip plow
- Water grooves
- Pad-Lock washer system
- Available in Threaded and 2024 Aluminum Smooth Post
Black: standard compound designed for dry condition riding
Red: semi-aggressive compound for good performance
Salmon: aggressive compound for extreme weather conditions
Dual: combination of Salmon and Black compounds for more controlled, smoother stopping

$8.99
The Problem Solvers Brake Mounting Nut is for front caliper brakes that take recessed fixing nuts. This chrome-plated steel Allen nut comes in 2 long lengths so that it will grip enough threads to tightly fasten the brake on even the thickest of fork crowns.

$9.00
Simple, economical threadless post mount caliper brake pads.
- Rubber compound improves performance over many OE pads

$9.00
Compatible with cantilever brakes, Jagwire's Mountain Sport Brake Pads boast Jagwire's tried-and-true all-weather compound for excellent speed control, stopping power and durability.

$9.00
- Replacement chain pins for Shimano 11-speed chains
- Compatible with CN7900/7801 chains
- 3 pins per pack

$9.99
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters.
- Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series
- Integral mold seals keep out the elements
- Compatible with 52mm lower headset bearings
- Compatible with 30mm (1-1/8") straight steerer tubes
- Durable steel construction
- Allows the installation of a straight steerer fork without changing out the headset lower

$9.99
The Problem Solvers Handlebar Clamp Shim allows you to fit almost any handlebars in almost any stem. It's machined of light and durable aluminum and grooved on the inside to hold tightly.

$10.00
Slip Avid's Rim Wrangler 2 Brake Pad Inserts into your Rim Wrangler 2 cartridges (sold separately) for excellent braking no matter the conditions. The easy-to-use cartridge design makes swapping pads a breeze. They're designed for use with linear-pull brakes.

$10.50
40-Series replacement cartridge bearings feature durable black oxide construction.
- Compatible with 110-, 40-, and 10-Series headsets

$10.99
Jagwire's Double-End Straddle Cable is a replacement straddle cable (also called a crossover or transverse cable) for cantilever brakes.

$10.99
SRAM Racing Grips offer a great grip for total control and come in several sizes to fit your front-end setup. These durable rubber grips have stylish logos stamped in them and are built to last and not slip.

$12.00 - $13.99
SRAM's 3.0 Twist Shifters are simple to use and offer solid shifting and reliable construction. Using SRAM's 1:1 actuation ratio technology, the 3.0s are easy to set up and easy to adjust. Plus, with a simple twist of the wrist, you can shift a handful of gears at once.

$12.99
Jagwire's M7 Adjusting Barrel is a 7 x 1.0mm-threaded replacement cable-adjusting barrel. It's the right part for many older-style mountain bike brake levers. It comes in two models and is made of durable metal with a lockring for locking your adjustments. You get a pack of 10.

$12.99
M21 rear derailleurs are designed to work with 6- and 7-speed Shimano road and mountain shifters. Enjoy the wide variety of bikes you can get going again with M21 rear derailleurs.
- Robust composite and steel construction
- Compatible with Shimano 6- and 7-speed mountain and road systems

$12.99
BB-UN26 cartridge bottom bracket.
- Smooth rotation
- Square taper spindle
- Sealed cartridge bearing assembly

$14.00
This is an FSA MegaExo Crank Arm Fixing Bolt for MegaExo Cranks.
- 26mm length
- 12g
- Designed to fit FSA cranks only
- Includes M18 bolt, M27 self-extracting cap and washers

$14.00
Keep that front end tight and responsive, while preserving the integrity of the carbon steerer on your high-end fork with FSA's Headset Compression Plug.
- Alloy top cap
- For carbon steer tubes

$14.99
Keep your seatpost right where you left it. Upgrade to a quick release seatpost clamp for easy seat height adjustments.
- Follow laser-etched torque listing on collar

$14.99
Linear pull brake noodles come in a variety of configurations designed to be compatible with any housing approach angle.

$14.99
Jagwire's M6 Adjusting Bolt is a metal adjusting barrel that is the correct replacement adjusting barrel for the cable clips/hangers found on many cable brake systems old and new. It makes it easy to tighten/loosen your brakes without tools. Its 6 x 1.0mm threading fits most clips/hangers and it has a lockring for locking your brake adjustment once it's set. You get a pack of 25.

$14.99
SRAM's MRX Comp Twist Shifters are simple to use and offer solid shifting and reliable construction. They shift a SRAM or Shimano front derailleur. These shifters are indexed to shift three gears, and feature micro-adjustments for perfect front derailleur alignment.

$14.99
Get back on the trail with a quality replacement hanger.
- 30mm washer provides full coverage over ABP bearing seals
- Included attachment hardware is reverse threaded
- For specific compatibility concerns, please contact our Customer Service team
- Hanger can be used on standard SRAM UDH set ups with 25mm washer
Specifications:
- Size: Rear drive side, Thru Axle
- Mounting location: Rear drive side
- Attachment: Thru axle nut

$15.00
This kit includes all the parts required to rebuild your V2 Dropper Post.
- Replacement Seal
- Upper and lower bushings
- Anti-rotation pins
- Compatible with V2 Dropper Post ONLY.

$15.99
These bar end adapters are required if you wish to add clamp-style bar ends to your Bontrager Satellite Plus Isozone handlebars.
- Required for bar end use on Satellite Plus Isozone bars
- For use with clamp style bar ends
- Includes 2 adapters and 2 rubber handlebar inserts.
- Bar end sold separately

$16.67
- 4140 heat-treated chromoly
- Reinforced end and 7 possible peg positions for longer peg life
- 3.9-inch (length) x 1-3/8-inch (outer diameter)
- 6.4oz (12.8oz/pair)
- Sold individually

$16.99
Key features:
- Original equipment replacement saddle ears for use with Bontrager saddles with carbon rails
- Compatible with Bontrager and Trek rotary head seatpost and seat mast systems
- Consult with manufacturer on compatibility with other saddle brands
$16.99
Kool-Stop disc pads are made with organic materials that are blended and bound together using a resin. The compounds do include small amounts of metal to improve the braking formula but though this is a mined material the pads are largely organic. The term semi metallic can also be used. Kool-Stop has found during testing that their disc pads are rotor-friendly and provide high performance braking throughout the life of the pad.
- Qty 1 = enough for 1 wheel
$16.99
Kool-Stop disc pads are made with organic materials that are blended and bound together using a resin. The compounds do include small amounts of metal to improve the braking formula but though this is a mined material the pads are largely organic. The term semi-metallic can also be used. Kool-Stop has found during testing that their disc pads are Rotor Friendly and provide high performance braking throughout the life of the pad.
- Qty 1 = enough for 1 wheel

$17.00 - $44.00
Service kits include dust seals, foam rings, oil seals, air and damper o-rings needed for basic service.

$17.10
Wheels Manufacturing Pedal Washers help distribute the forces of a pedal spindle on your expensive crank arms and allow you to torque pedals properly over and over again without damaging crank arms.

$17.50
SRAM's MRX Comp Twist Shifters are simple to use and offer solid shifting and reliable construction. They shift a 2:1 Shimano rear derailleur.
Page 1 of 4
Next page