Filter By:
- Bar Ends (1)
- BMX (2)
- Bottom Brackets (10)
- Brakes/Levers/Pads (32)
- Cables (8)
- Cassettes/Freewheels (20)
- Chainrings (14)
- Chains (8)
- Show More Categories
- Cranksets (8)
- Derailleurs (15)
- Forks (1)
- Handlebar Grips/Tape (12)
- Handlebars (1)
- Headsets (6)
- Pedals (8)
- Saddles (5)
- Seatposts (2)
- Shifters (12)
- Stems (4)
- Other (72)
- Show Fewer Categories
- Show More Brands
- Show Fewer Brands
- Show More Sizes
- Show Fewer Sizes
Parts

$9.99
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters.
- Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series
- Integral mold seals keep out the elements
- Compatible with 52mm lower headset bearings
- Compatible with 30mm (1-1/8") straight steerer tubes
- Durable steel construction
- Allows the installation of a straight steerer fork without changing out the headset lower

$10.50
40-Series replacement cartridge bearings feature durable black oxide construction.
- Compatible with 110-, 40-, and 10-Series headsets

$23.00
Cane Creek's Aheadset is a simple, affordable solution for your headset needs.
• Bearing Type: Cup and Cone
• Color: Black
• Crown Race: 30
• Defined Color: Black
• Lower Stack Height: 12 mm
• S.H.I.S Lower: EC34
• S.H.I.S Upper: EC34
• S.H.I.S. Stem Clamp Diameter: 28.6-26tpi Quill
• Upper Stack Height: 22 mm
• Weight: 205 g

$31.00
40-Series replacement cartridge bearings feature durable black oxide construction.
- Compatible with 110-, 40-, and 10-Series headsets

$44.00
Cane Creek's 10 Series has light, tough, and beautiful machined 6061 T6-aluminum cups, Cane Creek's corrosion-resistant black-oxide angular-contact bearings and quality seals throughout to keep the grease in and the dirt out.
• Technical Description: EC34/28.6/H16/K|EC34/30 /H12/K
• Top Type: EC - External Cup
• Top Head Tube Inside Dia.: 33.95mm
• Stem Clamp Dia.: 28.6mm
• Top Stack Height: 16mm
• Top Bearing Type: Black Oxide
• Bottom Type: EC - External Cup
• Bottom Head Tube Inside Dia.: 33.95mm
• Crown Race Seat Dia.: 30.015mm
• Crown Race Type: Polymer
• Bottom Stack Height: 12mm
• Bottom Bearing Type: Black Oxide
• Material: 6061 aluminum
• Weight: 88.29g

$52.50
Are you running linear-pull brakes on a bike with drop bars? You need Cane Creek's Drop V Brake Levers. They have the correct cable pull to properly activate linear-pull brakes. There's also a brake release button on the aluminum lever which facilitates easier wheel changes.

$74.00
The 40-Series is the workhorse of Cane Creek's headset line-up. Representing the balance of performance, durability and value, the series incorporates all the features necessary for a robust, lightweight, long-lasting headset. Zero stack uppers press into head tube with very little stack height. Lowers are either zero stack or external cup.
- Sealed black oxide bearings
- Carbon-friendy compression ring captured in top cover, keeping shims in place
- Steel crown race with integrated seals
- Interlok spacer compatible
- Compatible with tapered 1-1/8" to 1-1/2" steerer tubes, or straight 1-1/8" steerers with a conversion crown race (sold separately)

$75.00
Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets.
• Technical Description: ZS44/28.6/H8\EC49/40/K
• Top Type: ZS - ZeroStack
• Top Head Tube Inside Dia.: 44.00mm
• Stem Clamp Dia.: 28.6mm
• Top Stack Height: 8mm
• Top Bearing Type: Black Oxide, Sealed
• Bottom Type: EC - External Cup
• Bottom Head Tube Inside Dia.: 49.61mm
• Crown Race Seat Dia.: 39.79mm
• Crown Race Type: Steel, Face-Sealed
• Bottom Stack Height: 12mm
• Bottom Bearing Type: Black Oxide, Sealed
• Material: 6061 aluminum
• Weight: 97g

$25.00
$128.00
80% Off
Kiss faceplates goodbye with Crank Brothers' elegant Cobalt 3 Stem. It's crafted from 7075-aluminum with extensive machining for maximum weight savings and premium stiffness. The Cobalt 3 also features a single-bolt steerer clamp to trim even more grams and a dual-bolt handlebar clamp to give you pinpoint steering precision and a confident ride.

$27.00
Crank Brothers' Premium MTB Cleats are perfect for your Crank Brothers Eggbeater, Candy, Acid, Smarty, Mallet, and Quattro pedals. They're made from solid brass for crisp entry and exit, and top-notch durability.

$24.99
Dimension Freewheels are excellent drivetrain component replacements. With smooth shifting performance and durable construction, they'll help breathe new life into older bikes.
- A must have in any bicycle service department
- One-piece design
- Shimano index compatible
- Works with most friction shifters
- Suitable for use with e-bike drivetrains

$25.99
Dimension Two-Bolt Seatposts provide a sturdy and durable saddle perch for cross country and all-mountain riding in three diameters, rigorously tested to ISO 4210 Mountain standards.
- Constructed with AL-6061-T6 aluminum
- Shot-peened finish
- 0mm offset

$39.99
For cross country and all-mountain riding, Dimension Trail Stems provide a broad array of sizing options, rigorously tested to ISO 4210 Mountain standards.
- Constructed with AL-6061-T6 aluminum
- Shot-peened finish
- Dimension stems are not intended for use with carbon handlebars or carbon steerer tubes

$60.00
Dimension Freewheels are excellent drivetrain component replacements. With smooth shifting performance and durable construction, they'll help breathe new life into older bikes.
- A must-have in any bicycle service department
- One-piece design
- Shimano index compatible
- Works with most friction shifters
- Suitable for use with e-bike drivetrains

$8.00
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity
- No retainer means these bearings have 40 percent more capacity

$109.95
The new first choice of the Marathon World Champion, Alban Lakata.
OrthoCell-Inlays in the seating area generate the best possible pressure distribution. The innovative OrthoCell material ensures maximum reset force and is also more durable and lighter than gel. Specifically designed for men and intended for MTB touring, trail and all-mountain riding, this seat features an anatomically optimized relief channel in the sensitive perineal area and an athletic but light AirCell-Padding. The flat tail and the Y-shape guarantee full freedom of movement when in the typical mountain bike position. Sliding flanks help reduce friction when pedaling.
- Rail Material: Titanium
- Clamp Style: Std Rails
- Material: Synthetic

$6.00
Tight tolerances and precise torque specs mean precision parts like this MegaExo 12 Left Arm Crank Bolt need to be replaced from time to time. Make sure the heart of your drivetrain is secure, and pick up a spare or two today.

$14.00
This is an FSA MegaExo Crank Arm Fixing Bolt for MegaExo Cranks.
- 26mm length
- 12g
- Designed to fit FSA cranks only
- Includes M18 bolt, M27 self-extracting cap and washers

$14.00
Keep that front end tight and responsive, while preserving the integrity of the carbon steerer on your high-end fork with FSA's Headset Compression Plug.
- Alloy top cap
- For carbon steer tubes

$19.99
- Forged steel cups with caged 5/32" ball bearings
- TH-857 features a alloy top cover
- TH Series: External Cup, traditional
- S.H.I.S.: EC34/28.6|EC34/30
- Stack: 14.9mm/11mm
- Color: Black
- Weight: 126g

$21.00
Full Speed Ahead chainrings have powered multiple World, Tour de France, and Olympic champions, and will exceed your expectations.
- Chainring can be used with FSA SL-K direct mount outer chainrings
- Precision CNC machined AL7075/T6
- Shifting ramps and stainless steel pins on outer rings
- Compatible with Modular crankset (Gossamer/Energy / SL-K / K-FORCE)
- Laser-etched logo
- Material: Aluminum
- Ring Position/Type: Inner
- Drivetrain Speeds: 11
- Chainring BCD: 90mm

$39.00
FSA ATB chainrings deliver flawless shifting for any mountain drivetrain. Available in alloy and steel options.

$45.99
FSA's Pro Road chainrings are made from CNC-machined 7000-series aluminum for low weight. The teeth are ramped and pinned for excellent shifting, too.

$53.00
- Left and right bottom bracket cups with standard bearings for FSA MegaExo cranks
- BB-9050 is for 24mm spindle 68/73mm MTB K-Force and Team Issue cranks
- BB-8681 for K-Force Light (a non-ceramic option) and SLK Light Road MegaExo cranks (BB-8681 bearing covers have been redesigned so that the spindle now rides directly on the bearing itself)
- BB-7000 is for 24mm spindle 68/73mm shell MTB Gravity Lite, Moto X and Afterburner cranks
- BB-7000 is for 24mm spindle 83mm shell MTB Gravity Lite cranks
- BB-6200 is for 24mm spindle 68mm shell Energy, Gossamer and Omega No Bolt Design cranks
- BB-6000 is for 24mm spindle 68mm shell Energy, Gossamer and Omega cranks
- BB-4000 is for 19mm spindle 69mm shell Omega cranks
- BB-1000 is for 19mm spindle 68/73mm MTB Gamma cranks
- 1.37" x 24tpi (English threads) or M36 x 24tpi (Italian threads)

$9.00
Compatible with cantilever brakes, Jagwire's Mountain Sport Brake Pads boast Jagwire's tried-and-true all-weather compound for excellent speed control, stopping power and durability.