$44.99 - $49.99
Shimano Acera FC-M361 cranksets feature sturdy construction, reliable shifting, and replaceable chainrings. - Spindle Interface type: Square Taper JIS
- Optimum Power Transfer - Best Balance For Lighter Weight (-7G) And Efficiency - New Designed Crank Arm - Maintains High Rigidity And Reduces Weight - Hollowglide - 4-Arm Construction Crankset - Adapted For Race Specific Disc Brake System - Shorter Length Of Rear Center With O.L.D. 135mm - Redesign The Gear Teeth Profile To Fit Wider Gear Pitch - 50-34T/53-39T/54-42T/55-42T/52-36T - Iconic Design - Chain Line: 43.5
$81.89 - $97.99
Shimano's Claris Crankset makes it easy to find the right gear. Lightweight, stiff aluminum crankarms provide excellent power transfer, while the ramped and pinned chainrings boost shifting speed and precision.
$58.99 - $75.99
Shimano's 9-sped Alivio crankset is a solid replacement for your tired, worn out cranks. They give you the gears you need to quickly cruise through the city or take on the steepest trails. They are chainguard compatible, so if you're using these cranks on a commuter, your pant cuffs aren't in danger. Plus, the chainrings shift super-quick and precise.
$106.99 - $122.99
Finding the right gear is easy with Shimano's Sora Crankset. Lightweight, stiff aluminum crankarms provide excellent power transfer, while the ramped and pinned chainrings boost shifting speed and precision.
Designed specifically for use with H11 groupsets. Full Carbon crank arms and spider are hollow for maximum stiffness and minimal weight. Utilizes USB ceramic ball bearings. Light weight hard anodized alloy chainrings and alloy chainring bolts. Utilizes Campagnolo's Ultra-Torque crank system. - Ultra-Torque axles couple together in the middle of the BB shell via a Hirth Joint that self centers the crank. This results in a very light weight and stiff system that transfers power to the pedals without power loss - Features Campagnolo X.P.S.S. (eXtreme Performance Shifting System) featuring geometrically optimized chainring teeth. Optimized when mated to a full Campagnolo drivetrain - USB ceramic bearings increase smoothness and decrease rolling resistance, weight and the need for maintenance. USB bearings are 50% smoother than standard Campagnolo bearings - Ultra-Torque system have both drive and non-drive side bearings pre-installed - Double standardized bolt circle diameter allows for use of standard, mid-compact and compact chainrings - Required for use with H11 Ergopower shift levers, the crank spider is shifted outward to adjust for 135 and 142mm hub spacing while maintaining the Q-Factor - Requires use of Ultra-Torque bottom bracket cups
The Calibur Cranks are Odyssey's “traditional” 3-piece, 4130 chromoly cranks. With all the hardware and sealed bottom bracket included. Features: - LHD/RHD Compatible - Post-Weld Heat-Treated 4130 Chromoly Arms - Hollow 22mm, 48 Spline, Chromoly Spindle - 6mm Spindle Bolts - Sealed Bottom Bracket Included - Rustproof Black or Chrome - Available in 165mm, 170mm & 175mm size options
To be in sync on a tandem is the essence of the experience. FSA's Gossamer tandem cranksets keep your timing perfect, and keeps the power going to the rear wheel where it belongs. The communication and balance? That's up to you and your partner. - Shimano and SRAM 10-Speed compatible
Promax HF-2 BMX Cranksets are Promax’s top-of-the-line crank offering. Hollow-forged from 6061-T6 aluminum, both crank arms are hollow so they are super stiff, yet lightweight. The crank arms spin on a beefy 24-millimeter spindle permanently fitted into the drive-side arm. The HF-2 is available in anodized red, blue, gold, and black in 170, 175, and 180mm lengths. Now also available in 172.5 and 177.5mm lengths in black only. - Bottom bracket sold separately - Pedal washers included - Meets or exceeds ENBMX standards - Chainline: 43mm - Q-Factor: 167mm - BCD: 104mm - Weight: 29.5 oz.
Promax SQ-1 Crank Arm sets more than cover your need for hard-to-find lengths and hard-to-miss colors. - BCD: 110mm - Weight: 25.2 oz.
SRAM's GX-1400 1x Crankset delivers consistent performance every time out. Featuring SRAM’s X-Sync tooth profile, the GX single-chainring crankset is engineered for complete chain control. Each tooth’s thickness is CNC machined to work seamlessly with the chain’s inner and outer links. - Open Core and X-Sync Technology - CNC machined 7075, two-tone anodized X-Sync chainring (30/32T) - Weight: 680g (GXP, 175mm, 32T)
SRAM's GX 2x11 Crankset W/All Mountain Chainguard delivers consistent performance every time out. Featuring SRAM’s X-GLIDE chainrings, the GX crankset is engineered for 2x11-speed shifting performance. Flawless shifting means you’ll never again compromise your speed and power in unpredictable off-road terrain. No more missed shifts. X-GLIDE puts you in the right gear, right now. • 11-Speed • 6000 series AL • Bottom Bracket compatibility: GXP or BB30 (not included) • X-GLIDE 2x10 shifting technology • Chainrings: 36/24-tooth • Crank lengths: 175mm, 170mm • Color: Black • All Mountain Guard included, but not shown
- Solid pedaling efficiency - New 3D composite chain ring teeth composition is optimized for each chainwheel load out - Balance of strength and weight in 2-piece crank construction - Improved driving rigidity - Close ratio gear combination for minimum shifting gap and maintaining rhythm - Enhanced chain retention - Better sealing and better rotation - Small ball bottom bracket - Series : SLX - Crank Construction: HOLLOWTECH II Technology - Bottom Bracket: BB-MT800/BB-MT800-PA - Chain Line: 48.8 - Average Weight: 788.7g (28-28T) 761.4g (36-26T) 739.8g (34-24T)
FSA’s Road PowerBox Alloy Crankset employs a P2M convertible spider design for multiple chainring options. FSA's alloy arms and BB386EVO spindle mated together produce a very lightweight, extremely versatile power meter crankset available with a double chaining configuration. Firmware upgrades available for more features. - Cold forged AL6061/T6 aluminum crank arms - BB386EVO 30mm AL 7050 alloy spindle fits every frame (purchase BB separately) - AL7075 CNC chainrings - Chromoly chainring bolts - Fits Shimano and SRAM 10-11 speed systems - Spider-based power sensors provide total power output measurement of both legs, with Left & Right leg output analysis available with system upgrade - Bluetooth connectivity available with system upgrade - Battery life is approximately 300-400 hours - Easy-to-replace CR2450 battery
SRAM pioneered the 1x drivetrain, and the SRAM Force 1 crankset evolves the innovation. It’s lighter, stronger, and simpler—non-aero chainrings can now be installed with a single tool. For cross, TT, tri and crits, this is the king of 1x. - Single-ring drivetrain simplifies functionality and reduces weight - 48t variant has direct mount aero chainrings for better aerodynamics - Non-aero chainrings can be installed with a single tool, making gearing changes a breeze - SRAM X-SYNC wide-tooth, narrow-tooth chainring technology provides maximum chain control - DUB bottom bracket adds durability and simplicity - Can be upgraded to a power meter
Dimension Cyclocross Arm Sets made of 6061-T6 aluminum. - Forged AL-6061-T6 - BB Not Included - Chainrings Not Included - 110/74 BCD - Drivetrain Speeds: 10, 9, 8 - Number of Chainrings: Double - Pedal Spindle: 9/16-inch - Spindle interface Type: Square Taper JIS - Weight: 590g
The Legacy crank uses a super tough 2-1/2 piece construction, a larger 22mm spindle and square shaped chromoly arms to maximize strength. WeThePeople toughened up areas like the pedal boss with its own investment cast gusset, to beef things up. - Designed for use with a 22mm Mid Bottom Bracket (not included) - Full seamless Japanese 4130 chromoly tubing, liquid post heat-treated - Grind-friendly, square-shape arms - RSD/LSD compatible
- Pedal Spindle: 9/16-inch - BB Included: No - Chainring BCD: 96 Shimano Asymmetric , 64 Shimano Asymmetric - Intended Use: Mountain - Number of Chainrings: Double - Drivetrain Speeds: 11 - Spindle Interface Type: Shimano Hollowtech II - Chainline/Hub Compatibility: 141/148 Boost Hubs
The STYLO Carbon Fat Bike DUB crankset is for riders who feel most at home when riding endless single track. Built tough, to handle lines through rock gardens and trail, the STYLO Carbon is strong, stiff and light. Featuring SRAM’s DUB technology, this design simplifies the relationship of the spindle to the bottom bracket. DUB-powered cranksets mean simplicity, compatibility, and durability. - SRAM DUB technology creates a lighter, stiffer and stronger crankset - Proprietary carbon layup technology - Included direct mount X-SYNC 2 chainring provides significantly quieter performance, with better mud clearing and durability - Chainring is designed specifically for Eagle chains and drivetrains - DUB compatible bottom bracket sold separately - Fat bike frame compatible - BB Included: No - Chainring BCD: SRAM Direct Mount - Crank Intended Use: Mountain - Number of Chainrings: Single - Drivetrain Speeds: 12, 11, 10 - Spindle Interface Type: SRAM DUB - Chainline/Hub Compatibility: 170/177 Hubs
The new Record 12x2 Speed crankset: a new hole-free design for the right-hand crank that optimizes aerodynamics. The new carbon fiber Record 12x2 Speed crankset with unidirectional finishing guarantees continuity with the finishing of the entire groupset, whilst maintaining the Ultra-Torque bracket system on the steel axle to ensure perfect transmission of power. The new Record 12x2 Speed crankset can be installed on any type of frame, whether or not it is being used with disc brakes because it optimizes the chain line on the frame with a rear hub flange measuring 130, 135 or 142 millimeters without affecting the Q factor that remains constant at 145.5 millimeters. The innovative design of the outer chainring ensures faster, quieter derailing owing to the contoured pin. The symmetrical design of the inner chainring teeth allows improved stability with chain crossovers. The double wheel sizing standards (112 and 145 millimeters) enable reducing the weight through greater use of carbon fiber. There are eight fixing screws for increased structural stiffness. The varying number of pins for each of the three chainring combinations (34/50, 36/52, 39/53) facilitates upshifting due to the optimized free strokes associated with each combination. The special drains on the inside of the outer chainrings optimize performance when downshifting in dead spots.
Campagnolo is all about drivetrain evolution, and their Chorus Crankset proves it. The full-carbon cranks and 4-arm spider feature a unified bolt pattern that allows for all three chainring standards. This design incorporates an 8-bolt pattern with a spider arm that not only holds the chainring in place by way of the bolt, but also supports the chainring to increase system rigidity. The crank arms and spider are hollow for maximum stiffness and minimal weight. The integrated Ultra-Torque spindle joins the crankset together via a toothed Hirth joint in the center. - Chainring BCD: Campagnolo 146 Asymmetric, Campagnolo 112 Asymmetric
With their New Rando crankset, Velo Orange meets the demand for the classic 50.4 BCD crank still sought after in randonneuring and touring circles around the world. New Rando is modeled after classic 50.4 BCD cranks but with modern touches to improve performance. These include ramped and pinned chainrings that are thicker for less flex, stainless steel hardware, and forged 7075 aluminum arms. Get the classic style and versatility you want with the modern performance you've come to expect. - Spindle interface: Square Taper JIS - Weight: 540g
When Quarq set out to build their next-generation power meter, they wanted to build the best-performing power meter for every facet of cycling and triathlon, and for riders at every level. Like its Quarq brethren, the new DZero measures power in the heart of the bicycle — the crankset spider, scientifically proven to be the place for the most accurate measurement. With a new measurement circuit, revised strain gauge design, improved accuracy throughout the pedal stroke and software advances built into the Qalvin App, the DZero represents the state-of-the-art in power meter technology As Quarq’s next generation of power meters, the DZero combines 10 years of technology advances with new features such as dual Bluetooth low energy and ANT+ wireless data transfer, the new Qalvin BLE app. - 10K temperature compensation: Eliminates variables caused by heat and cold to provide an unwavering record of your performance through all conditions - Built to last: Features an IPX7 waterproof rating - Bluetooth low energy technology and ANT+ wireless data transfer - Battery: CR2032, 200-hour battery life, change without tools - OmniCal: swap chainrings without affecting accuracy - 2-year warranty - IPX7 waterproof rating - Accuracy within 1.5% - Bottom Bracket Compatibility: BB30 - Forged aluminum models do not work with BBright or BB386EVO bottom brackets
Back in the day, we drilled holes in our chainrings to make them lighter. The weight savings were minimal, but they sure looked cool. Velo Orange's Drillium Crankset recaptures the look. It's based on their Grand Cru 110 cranks with a very low 150mm Q-factor. And, while it may look like a vintage crank, the Drillium is cold forged in modern high-strength alloy. The 7075 alloy chainrings are highly durable, featuring ramps and pins for fast and smooth shifting with 6-10 speed drivetrains. The crank arms have classically styled reliefs, and the alloy dust caps function as self extractors with the supplied crank bolts. - Spindle interface: square taper JIS - BCD: 110mm - Weight: 645g
Harness the power of your tandem team with FSA's Gossamer MegaExo Tandem Crankset. The rear crankset features cold-forged aluminum crankarms, hill-topping 52/39/30 chainrings, a 42-tooth idle chainring, and a proprietary spacer system to fine-tune your chainline.
When Quarq set out to build their next-generation power meter, they wanted to build the best-performing power meter for every facet of cycling and triathlon, and for riders at every level. Like its Quarq brethren, the new DZero measures power in the heart of the bicycle—the crankset spider, scientifically proven to be the place for the most accurate measurement. With a new measurement circuit, revised strain gauge design, improved accuracy throughout the pedal stroke and software advances built into the Qalvin App, the DZero represents the state of the art in power meter technology As Quarq’s next generation of power meters, the DZero combines 10 years of technology advances with new features such as dual Bluetooth low energy and ANT+ wireless data transfer, the new Qalvin BLE app. - 10K temperature compensation: Eliminates variables caused by heat and cold to provide an unwavering record of your performance through all conditions - Built to last: Features an IPX7 waterproof rating - Bluetooth low energy technology and ANT+ wireless data transfer - Battery: CR2032, 200-hour battery life, change without tools - OmniCal: swap chainrings without affecting accuracy. - 2-year warranty - IPX7 waterproof rating - Accuracy within 1.5% - Bottom Bracket Compatibility: SRAM GXP - Forged aluminum models do not work with BBright or BB386EVO bottom brackets
Surly designed the O.D. crankset to offer frame and tire clearance while maintaining a reasonable q-factor (pedal stance). Maximizing the distance between the chain and the tire is important on fat bikes such as the Pugsley and Moonlander, or if you're running really big tires and rims on some other bike (like our new Krampus, for example). With normal cranks, wide tires on wide rims can rub the chain when in the lowest, or farthest-inboard, gear combinations. Like the MWOD crank, the O.D. crank doesn't just add a longer spindle to move the rings outboard. Rather, it does away with the big ring of a standard triple and moves the middle and granny rings to the outer and middle positions. This effectively moves the rings outboard without moving the arms outboard too. The O.D. is a simple, dedicated version of this idea. Neato! Forged of 7000 series T6 aluminum, the O.D. crank is a 2-piece, with spindle embedded inextricably in the drive side arm. It's a dedicated 2x, although its chainline is outboard a bit compared to standard mountain cranks, and it is 9 and 10 speed compatible. The 132mm, PF41 bottom bracket O.D. crank is what goes on the Ice Cream Truck bikes, so if you've got that setup, that's your crank. Surly also offers 33t and 20t rings separately. These chain rings are designed to shift best in specific combinations….change to a 39/22t, for example, and your shifting will suffer. The bearings on which they spin are also worth mentioning: Surly upgraded the bearings on these and the Mr. Whirly and MWOD cranksets to aftermarket Enduro bearings with double labyrinth seals, meaning they actively shed and stay clean of dust, muck, and grime, even in wet and muddy climates.
The Race Face Atlas crank is the burliest alloy CINCH offering; designed to excel across many disciplines including trail, enduro, DH and freeride. Featuring the versatile CINCH interface for interchangeable spiders, limitless ring combinations, a 30mm alloy spindle and compatibility across all relevant frame standards. - Forged 7050 aluminum alloy arms - Bracing matrix at the back of the crank arms for added stiffness - Industry standard 30mm spline interface - Removable spider offers the ability to convert between existing chainring standards while remaining flexible to future developments - Interchangeable spindle option of the Cinch system allows you to use the same crankset with 68/73mm and 83mm frames, as well as the RF BMX spindle and spider - Spindle diameter: 30mm - Direct mount chainline: 48.5, 55mm (Flipped) - 2X Cinch spider chainline: 47mm - Boost 2X Cinch spider chainline:50mm - Weight: 690g
Suntour's XCM-T is a 9-speed triple crankset with melt forged alloy arms that comes in either square taper or Octalink bottom bracket options. - Steel chain rings - Forged alloy crank arms - 50mm chain line with a 113mm BB
$99.99 - $113.99
- Series: SORA - Crank Construction: 2-piece crank construction - Bottom Bracket: BB-RS500, BB-RS500-PB - Chain Line: 43.5 - 9-speed - Four-arm BCD
Page 1 of 5 Next page