Other

$20.00
Available in the most common sizes and thicknesses-in small or bulk quantities, Problem Solvers headset spacers help riders get their stack height just right.
- Made from Aluminum, anodized or polished finish, without logos
- 1-1/8" Diameter
- S.H.I.S. Stem Clamp Diameter: 28.6mm

$27.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x8 Flat Head Screw

$35.99
This is the correct plug-and-play wire for Shimano's E-Tube Di2 electric-shifting systems. It comes in sixteen different lengths, so choose the one(s) that's right for your Di2 E-Tube wiring configuration.

$1.65
- Half-link connector allows you to add or subtract half of one link (1/2 inch) from the chain in order to optimize chain tension
- Uses standard chain pin connector and tool

$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt

$15.00
This is an FSA MegaExo Crank Arm Fixing Bolt for MegaExo Cranks.
- 26mm length
- 12g
- Designed to fit FSA cranks only
- Includes M18 bolt, M27 self-extracting cap and washers

$22.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x8 Flat Head Screws

$10.99
40-Series replacement cartridge bearings feature durable black oxide construction.
- Compatible with 110-, 40-, and 10-Series headsets

$40.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt

$24.99
Get back on the trail with a quality replacement hanger.
- Attachment hardware is sold separately
- For use with 142x12mm, 148x12mm, 157x12mm, and 197x12mm hubs
Specifications:
- Size: Rear drive side, Thru Axle
- Mounting location: Rear drive side
- Attachment: Thru axle nut

$14.99
Keep your seatpost right where you left it. Upgrade to a quick release seatpost clamp for easy seat height adjustments.
- Follow laser-etched torque listing on collar

$23.99
You have to get that handlebar height just right. It's more comfortable, more efficient, and helps keep your entire upper body healthier. Wheels Manufacturing has your well-being covered with a wide variety of sizes to ensure your bars are right where they need to be.
- Spacers are sold individually or in packs of 5 or 10 spacers. Select options from the dropdown menus to display pack size

$15.00
This kit includes all the parts required to rebuild your V2 Dropper Post.
- Replacement Seal
- Upper and lower bushings
- Anti-rotation pins
- Compatible with V2 Dropper Post ONLY.

$17.50
$25.00
30% Off
The EDC Cap Kit includes the worlds lightest headset top cap (4.2g), and an EDC steerer plug with drain hole which keeps crud out of your steerer.
Top caps are compatible with all 1-1/8" aluminum steerer tubes.
The EDC steerer plug is required for EDC tool storage and is compatible with most aluminum tapered steerer tubes.
KIT INCLUDES
- EDC TOP CAP
- EDC steerer plug
- 2x 1mm, 3mm, & 5mm Headset Spacers

$6.00
KMC Missing Link connectors are for use on new chains or to keep in your seat bag for an emergency repairs.
- Compatible with KMC and Shimano 10-speed chains
- Includes 2 pairs

$27.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M8 Chainring Bolt

$15.00
Keep that front end tight and responsive, while preserving the integrity of the carbon steerer on your high-end fork with FSA's Headset Compression Plug.
- Alloy top cap
- For carbon steer tubes

$45.00
- Air Spring Upgrade Kit—DebonAir C1
- Includes DebonAir C1 Assembly, seal head
- PIKE B1+/Revelation A1+ (2018+)

$40.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M3x10 Socket Head Cap Screws

$8.50
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity
- No retainer means these bearings have 40 percent more capacity

$22.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (2) M4x8 Flat Head Screws

$19.99
The Problem Solvers Backstop bolts onto the frame to provide two stops for your cable housing. It's made of light, durable CNC-machined aluminum with a stainless-steel bolt, and the stops are slotted for easy cable installation/removal.

$40.00
All Wheels Mfg. replacement derailleur hangers are produced in Colorado to exacting tolerances. - Replaces Norco Part #913015-001-2 - For use with M12x1.75 MAXLE Thru Axles - CNC machined 6061 aluminum - Black anodized finish

$8.00
Replacement Remote-end Hose Barb for RockShox Reverb dropper seatposts.
- Fits all generations of Reverb

$40.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M6 Chainring Bolt

$32.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Novara #Q28-4139 - (2) M4x8 Flat head screws included Note: This dropout is very similar to Wheels Mfg DROPOUT-243. Look carefully at the machined cutout on this hanger and Wheels Mfg DROPOUT-243 to determine which hanger fits your frame.

$47.25
BB30 service kit includes 2 Enduro 6806 ABEC-3 sealed bearings and 2 retaining clips. - Bearing Dimensions: OD: 42mm / ID: 30mm / Width: 7mm - Direct replacement bearing for OEM BB30 and BB30A systems - Enduro ABEC-3 bearings

$23.99
Use these stainless steel Jagwire disc brake shims to position a 6-bolt rotor in just the right spot.

$40.00
All Wheels Manufacturing replacement derailleur hangers are produced in their Colorado shop to exacting tolerances. - CNC machined 6061 aluminum - Black anodized finish - Includes (1) M6 Chainring Bolt

$12.99
Crown races for Cane Creek headsets fit a variety of lowers and crown race seat diameters.
- Compatible with 10-, 40- and 110-Series headsets and backwards compatible with S and XX Series
- Integral mold seals keep out the elements
- Compatible with 52mm lower headset bearings
- Compatible with 30mm (1-1/8") straight steerer tubes
- Durable steel construction
- Allows the installation of a straight steerer fork without changing out the headset lower

$8.50
- MAX bearings are filled completely with high precision Grade 10 balls for maximum load capacity
- No retainer means these bearings have 40 percent more capacity

$8.99 - $13.15
The Problem Solvers Brake Mounting Nut is for front caliper brakes that take recessed fixing nuts. This chrome-plated steel Allen nut comes in 2 long lengths so that it will grip enough threads to tightly fasten the brake on even the thickest of fork crowns.
Page 1 of 2
Next page