Maximize your visibility with this amazing taillight. The SuperFlash aims 2 extreme LEDs plus a half-watt Blaze LED for light that can be seen for up to 1 mile! The ultra-compact case is weatherproof, light and durable. And, the SuperFlash includes a bike mount and clip mount for multiple mounting options. Plus, the 2 AAA batteries (included) offer run times up to 100 hours.
Welcome to the future The Transmitr Remote wirelessly controls up to seven Transmitr ready devices. It easily attaches to any bike's handlebars for convenient on the bar control of all Transmitr lights. The ANT+ enabled Transmitr remote is compatible with all Transmitr products and allows for wireless on/off, mode selection, real time light battery status, and more. - Transmitr remote can simultaneously control up to 7 lights - ANT+ enabled for use with all Transmitr products - Use Transmitr system for wireless on/off, mode selection, and more - Can be used with multiple Flare RT lights for turn signal configuration - Includes CR2032 battery, mount, and quick-start manual
Product details: - Replacement or extra mounts for all Bontrager Flare rear lights - Use to mount Flare lights to seatposts, racks, seatstays, or any other creative spot - Kit includes Flare light mount, two bases, and rubber strap adapters
Portland Design Works' Danger Zone Taillight will enhance your visibility like the beacon on a jetfighter with two 1/2-watt LEDs. It boasts three modes and includes seatpost, seatstay,. and backpack mounts, too. - ?Two 0.5 watt red LEDs by Nichia Brand - Three modes: zZz, a-HA!, and Rock Steady - Up to 50 hours run time on 2xAAA batteries (included) - Includes Stayputnik seatpost mount - Weatherproof exterior for all season riding - Weight: 57g (2oz)
The water-resistant Light Kit features a clip mount to install on your Burley trailer's light loop or bracket. The 5-LEDs shine bright with 4 modes (flashing, constant, chasing & random) to provide increased visibility day or night. - 5-LEDs - 4 modes (flashing, constant, chasing & random) - Includes: (1) Red Light & (2) AAA Batteries - Compatible with Burley trailers using a Light Bracket or Light Loop
Planet Bike's Beamer 1 & Blinky 3 Light Set will keep you safe when it's dark. For excellent visibility the Beamer headlight provides a focused LED beam and the Blinky taillight boasts 3 red LEDs. There are also quick-release mounts for easy on/off.
Vya Smart Lights are a revolutionary concept incorporating technology to provide effortless safety in an ultra-compact, convenient design. Auto-on sensors, waterproof bio-renewable construction, and innovative safety features create the most technically advanced light available for cyclists. The Vya Commuter Combo is the perfect solution for riders that pedal in high traffic areas and want the added assurance of SafePulse visibility day and night. Features - 150 Lumen Headlight & 50 Lumen Taillight with variable SafePulse beam pattern optimized for maximum visibility day and night - Smart sensor technology senses motion and automatically turns lights on when inserted into mount; Auto-off when bike is parked removed from mount - SafePulse beam pattern scientifically designed to enhance a passing driver’s ability to judge the cyclist’s distance and direction of travel without the risks associated with flashing lights - Beam patterns optimized to give a wide swath of light that can be seen clearly from the rear and side ideal for city riding - Extra long run-time perfect for riders who do not want to charge lights on a daily basis, Low battery status is indicated by rapidly flashing sidelights - USB Mount Receptor allows lights to be securely mounted or removed from bike in seconds with a simple, secure 1/4 turn lock; lights will not turn on when removed from mount and slipped into a pocket or bag - Easy direct USB charging without cables fully charges in 2 hours - Made with bio-renewable material waterproof to 1 meter (when inserted in mount) for all-conditions reliability (IP67 Rated) Headlight Specifications - Lumens: 50 (high), 50 (SafePulse) - Runtime: 480 min (high), 480 min (SafePulse) - Beam Angle: 30° (flood) - Charge Time: 120 min
Big things come in small packages and the NiteRider Lumina Micro 650 is the proof. The Lumina Micro 650 delivers a powerful punch with 650 lumens of light output, helping you to safely navigate your ride. Allowing you to see and be seen. As with all Luminas in the series, it features a low battery indicator – when the power button changes from blue to red color this indicates that there is approximately 15-20% battery life remaining. LUMINA MICRO 650 - All New Collimator Lens, produces a generous even widespread beam - Daylight Visible 650 lumen output head light - CREE LED at 6000k - Ride safely with Daylight Flash Mode! - 4 Light Levels plus 1 Daylight Flash Mode - FL1 Standard IP64, dust and water-resistant - Secure on and off-road capable Handlebar Mount - Fits standard and oversize 35mm handlebars - Compact and lightweight design that's perfect for helmet mounting (Helmet Mount Sold Separately) - Convenient USB rechargeable - Low battery indicator - Lock Mode, perfect for use during storage and transporting the light. Press and hold power button for 7 seconds to lock out operation of light. SABRE 80 - Daylight Visible Flash (DVF) - 80 lumen super bright tail light - Easy on and off seat post strap mount with quick release tab - Amber side lights for 180 degrees of visibility - Convenient USB rechargeable - Be Seen by cars = Be Safe - FL1 Standard IP64, water resistant WARRANTY - The Lumina Micro 650 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. LUMINA MICRO 650 - LED Light Head - Internal Li-Ion Battery - Handlebar Mount fits up to 35mm - USB Charging Cable SABRE 80 - LED Tail Light - Seatpost Mount - USB Cable
Product details - Compatible with USB rechargeable Flare taillights and all Ion headlights - Fits handlebars/seatposts 22.2-35mm and Ride Tuned Seatmast Caps - Silicone body with a tooled adjustment clamp diameter - When rotated for a Flare, the bracket is angled to compensate for an angled seat tube - 25g
A compact and powerful light set designed to help riders see and be seen on the street, path, or trail. Ion Comp R provides compact power to help illuminate the street, path, or trail, and Flare R City rear tail light helps you stand out. Both are USB-rechargeable Daytime Running Lights that feature distinctive focus, flash, and range flash patterns designed to boost visibility. Product details - Dedicated Daytime Running Light modes on both lights designed for increased visibility - Ion Comp R provides a warm, wide 700-lumen beam for confident night riding and a great depth of field - Flare R City delivers a wide, 35-lumens beam that's ideal for city use - DRL-specific focus, flash, and range flash patterns offer ultimate daytime visibility - Blendr-compatible for integrated mounting on compatible Blendr stems, helmets, and helmet mounts - USB-rechargeable with included micro USB cable
Bontrager's Ion 120 and Flare 1 light set is at the ready to keep you shining on every ride! These front and rear lights are simple, powerful, and easy to use. Plus, they feature long-lasting steady and flash modes and easily attach to virtually any handlebar and seatpost with the included mounts. - Ion 120 offers high, low, and flash modes for versatile lighting options - Sync bracket allows for quick and easy adjustment, mounting, and removal - Flare 1 features three modes—steady, flashing, and random flashing - Included seatpost clamp and belt clip mount for versatile mounting options - Set includes: Ion 120 front light, Flare 1 rear light, and mounts - 50+ hour battery life, front and rear - Includes all required batteries (5 AAA) - Rechargeable: No - Weight: 135g
The Ion Pro RT front bike light lets you ride with confidence at all hours of the day. The USB rechargeable light features 5 modes for day and night, and its compact design and adjustable hard mount make it easy to securely attach it to the handlebars of any bike. Product details - Ion Pro RT provides a powerful beam that lights up the full width of any road or trail - 1300 Lumens via high-power CREE LED - 1300LM-1.5hrs, 800LM-3hrs, 400LM-6hrs, night flash-26hrs, day flash 22hrs - Connect with Garmin and Bontrager ANT+ devices for always on, battery status, and control - Includes adjustable light mount that fits bars from 25.4-35.0mm - Blendr compatible with helmet mount available - Includes Ion Pro RT light, Adjustable hard mount, and micro USB charging cable
Put a Flare almost anywhere - For use with all Flare tail lights - Perfect for attaching to a seat pack, belt, backpack, or anything with a loop - 2g
A daylight-visible tail light with 35 Lumens of balanced light to keep you visible in the city, day or night. Paint the city day or night The Flare R City tail light is daytime visible and designed for the city. A wide beam spread, focused optics, and an interruptive flash pattern make it visible from over 400m during the day. A built in ambient light sensor provides auto-brightness control, and the included Quick Connect bracket offers simple removal for recharging via the included USB cable. 35 Lumens of power and the wide visibility angle of the Flare R City tail light make you the biggest distraction on the city streets, day or night. - 35 Lumens provide visibility from over 400m day or night - Wide visibility angle intended for city use - Two day-time visibility modes and two night modes - Day flash 35LM-8hrs, night flash 35LM-16hrs, day steady 20LM-3hrs, night steady 2LM-20hrs - Integrated light sensor for auto-brightness control - Battery save mode at 5% life helps ensure a safe ride home with depleted battery - Quick connect bracket with 16 degree offset compensates for seatpost angle - Includes Quick connect bracket and micro USB charging cable
Three bright LEDs with over 270 degrees of weather-resistant visibility. Send the right signal Added visibility. Flare 1 is powered by three ultra-bright LEDs that provide over 75 hours of run time on only two AAA batteries. Batteries included—when else does that ever happen? Product details - Be seen with Bontrager's focused optics and over 270-degree visibility - Three bright white, environmentally-friendly LEDs - Three modes—steady high beam, flashing and random flashing - 80+ hour run time - Includes AAA batteries and a seat post clamp
A powerful front bike light with a wide beam that illuminates any road or trail and can be seen from 2km away as a daytime running light. Ride with confidence, day or night, with the Ion Elite R Front Bike Light. This USB-chargeable light features a powerful beam with a wide pattern perfect for the road, path, or trail. Designed to offer lumens that last, Ion Elite R lets you ride longer with sustained brightness and features five modes including day flash for use as a daytime running light. - Ion Elite R provides a powerful beam that lights up the full width of any road or trail - A warm, wide 1000 lumen beam allows confident night riding - Specifically designed focus, flash, and range flash patterns offer ultimate daytime visibility - Long-lasting brightness exceeds industry standards - 1000lm-1.5hrs, 650lm-3hrs, 350lm-6hrs, night flash-26hrs, day flash-22hrs - Adjustable hard mount attaches securely to handlebars between 25.4-35.0mm - Blendr compatible with available helmet mount - Includes an adjustable hard mount and micro USB charging cable - Battery: 5000Li-Ion - Weight: 187g
Safely ride into the night with light sets from Bontrager, all featuring 270 degrees of visibility and steady and flash modes. - Set includes: Glo headlight, Ember taillight and 2 silicone straps - Each set includes lights with focused optics and over 270 degrees of visibility Glo Instantly add safety lighting with the Glo headlight. Used as a stand alone system in twilight conditions, as additional lighting, or as an emergency back-up, these compact, bright and stylish lights can be run in either steady or flashing modes and provide over 40 hours of run time. Elastic bands add versatility. - Be seen with Bontrager's focused optics and over 270 degrees of visibility - One bright white and environmentally-friendly LED - Features steady and strobe-flash modes - Run time of 40+ hours via two 2032 batteries (included) - Includes silicone strap for quick installation on handlebars, seatposts, and more Ember Instantly add a burst of visibility to the rear of your bike with the Ember taillight. Used as a stand alone system in twilight conditions, as additional lighting, or as an emergency back-up, these compact and stylish lights provide key visibility with steady or flashing modes and provide over 40 hours of run time. Ember Multi-Use Lights include two CR2032 batteries and an elastic strap for attachment to a variety of surfaces including helmets. - Be seen with Bontrager's focused optics and over 270 degrees of visibility - Features steady and strobe-flash modes - Run time of 45+ hours via two 2032 batteries (included) - Includes silicone trap for quick installation on handlebars, seatposts, compatible shoes, and more
Quick, easy straps for your Flare and Ion lights Product details (Front - Ion) - Fits all Ion headlights - Works best with 22.2 - 35.0mm handlebars Product details (Rear - Flare) - Fits all Flare tail lights - Works best with 27.2 - 31.6mm seatposts - Includes 16 degree offset for optimized use on seatposts
Blendr is the ultimate integration system for clean and easy installation of lights, computers, and other accessories. Start with a Blendr stem, add the appropriate base, and finish with the Blendr High Ion Light Mount for a clean, flush look that securely holds your Bontrager Ion light above your stem to see and be seen. Key features: - Blendr is an elegant, integrated accessory mounting solution - Provides clean and secure mount for Bontrager Ion headlights - Works with any Blendr-compatible stem and the accompanying base - For use with Blendr bases (Pro, XXX, XXX bar/stem, and select Elite bases)
Product details - Perfect for mounting compatible Flare taillights to rear rack - Includes a bolt and star washer for extra security - Easiest to install with light installed for better leverage
The Bontrager Blendr Saddle Mount makes riding safe easier than ever. All you need are two secure bolts to easily and cleanly attach compatible Bontrager Flare tail lights so you can always be seen when you ride. - Blendr mount allows for integrated rear light attachment - Easily and securely mounts to compatible saddles - Includes mounting hardware (2—3mm M5 bolt) - Torque included M5 mounting hardware to 2Nm
Small but powerful The Ion 100 R is daytime visible and designed for the city. A wide beam spread, focused optics, and an interruptive flash pattern make it visible from over 500m during the day. A built in ambient light sensor provides auto-brightness control, and the included Quick Connect bracket offers simple removal for recharging via the included USB cable. - Focused optics provide be seen safety with a broad but powerful light - Integrated light sensor auto-adjusts brightness in flash mode - 100 Lumens via high-power CREE LED - Ideal for handlebar or on bike mount - 100LM-1.5hrs, 50LM-3hrs,5LM-16hrs, Night Flash-7hrs, Day Flash-5hrs - Includes quick connect bracket and micro USB charging cable - Blendr compatible, secure bar mount available
Planet Bike's Superflash USB uses super bright LED's for visibility up to 1 mile. The ultra-compact case is weatherproof, light and durable, and features a soft-touch power switch. A USB-rechargeable lithium ion battery provides up to 36 hours of run time.
Easily integrated Designed specifically for specific Bontrager Circuit MIPS road bike helmets, the Blendr mount easily integrates Bontrager Ion lights and GoPro cameras. - Quickly mount front light and camera accessories on the front of your Bontrager Circuit MIPS road bike helmet. - Tested with an accelerometer for intended breakaway point if involved in a crash
Shine on The Ion 35 front light comes in an easily mountable compact size, yet comes to the party with enough power to light the road in front of you. A 35 Lumen front light featuring three modes: high, low and flash while offering 270 degrees of visibility. Comes with batteries and Sync mounting brackets. - 35 Lumens via high-power, environmentally-friendly, 0.5W CREE LED - Be seen with focused optics and over 270 degrees of visibility - High, low, and flash modes for versatile lighting options - Sync bracket allows for quick and easy adjustment, mounting, and removal - Includes 3 AAA batteries and Quick Connect bracket - Blendr compatible
SP-12 Flex-Tight Seatpost Bracket for most CatEye taillights
Super bright, compact, quick and easy - there's no reason not to grab a pair of ORB's for your next ride. Features - USB rechargeable - Simple,lightweight, and compact design - Easy installation and switch operation - Universal rubber band - Mount size: ~22-32mm Modes/Run Time - Constant: 2.5 hours - Rapid flashing: 5.5 hours - Slow flashing: 6 hours
Seca 2000 builds on the world’s most popular trail light family in a cost-effective solution that is reliable, durable, and features a trail-optimized beam pattern that is unmatched in the market. Robust waterproof construction, custom optics, enhanced firmware, and GoPro mount compatibility further the Seca’s reputation. The 2000 Race comes standard with the lightweight 3-cell battery pack that is perfect for the after-work ride. Features - 2000 Lumen output certified to the FL-1 Standard - Premium illumination from a 4 LED array with industry leading CREE LEDs - Custom engineered reflector/optics diffuses flood LED to provide ultra-wide beam pattern and focuses spot LEDs to maximize forward visibility - Advanced electronics with custom firmware keeps lumen output from sudden drops - Additional ‘Race Mode’ feature enables riders to conveniently toggle between high and medium output - Illuminated power button with low-runtime indicator and enhanced tactile engagement specifically for gloves - Waterproof design provides all-weather reliability (submersible up to 1 meter with battery connected) - Multiple mounting options include helmet, handlebar, and GoPro interface Specifications - Lumens: 2000 (high), 1000 (medium), 500 (low), 500 (pulse) - Runtime: 90 min (high), 180 min (medium), 360 min (low), 720 min (pulse) - Beam Angle: 25° (spot) - Charge Time: 150 min
The ultra-compact Vibe Pro Headlight is the perfect lighting solution for effortless, smart safety. This extra bar mount lets you switch the light between bikes in seconds - perfect for families or those with a quiver of two-wheeled fun. The included non-slip strap easily fits around oversize bars but can be cut down for an ideal fit on small handlebars. Features - Innovative twist-lock system ensures Vya will lock into mount - Secure design allows Vya Pro Headlight mount to be placed above or below the handlebar due to its unique design. Vya Headlight is designed to be mounted in front of stem. - Compatible with Vya Pro Headlight and standard Vya Headlight
- Compact, sleek design - Robust safety features including daytime and nighttime pulse modes - Side illumination ports allow cyclists to be seen when riding across traffic lanes - 6 modes including Daytime Pulse and Nightime Pulse - Fully USB rechargeable: no batteries to buy or replace - Memory function allows light to turn on at the last mode that was used - Power saving function automatically switches the light to the lowest lumen output when the battery gets to 10% power or less - Built-in battery indicator: red = lower than 25%, yellow = 50%-25%, green = fully charged - No tools bracket
The NiteRider Lumina Handlebar Strap Mount offers a wide variety of handlebar size fitments and remains rock solid while riding through rough terrain. It’s easy to install and, like all NiteRider mounts, features a quick release tab for when it’s time to recharge or leave your bike unattended. System Compatibility: - Lumina Series - Mako Series - MiNewt Cordless Series
Vya redefines bike safety with smart, advanced features and an ultra-compact design. Extra seat post mounts allow Vya to be switched between bikes in seconds – perfect for families and multiple bike owners. This versatile mount can be used with the horizontal position of the Vya Pro Taillight or the vertically mounted Vya. Features - Innovative twist-lock system ensures Vya will lock into mount and not vibrate free - Vya Pro Taillight mounts in a horizontal orientation; flip mount down for the standard vertical style of the Vya taillight - Compatible with Vya Pro Taillight and standard Vya Taillight
The NiteRider Sentinel 250 is designed to increase cycling safety by way of 2 varying flash patterns and 2 steady beams (High/Group Ride Mode). Behind the durable red lens and casing are two powerful LEDs that emit 250 lumens in the brightest Daylight Visible Flash setting, allowing you to be seen day or night. For enhanced safety, the Laser Lane modes (3) are designed to project ultra-bright laser lines on the ground. This creates a virtual lane for the rider, further increasing visibility. - The Sentinel 250 complies with FDA standard for lasers, notice No. 50, 2007 - Daylight Visible Flash (DVF) - Highly visible laser lanes - All in one, Laser and tail light! - Convenient USB rechargeable - Group Ride Mode – be seen without distracting fellow cyclists - Easy on and off seat post strap mount with quick release tab - FL1 Standard IP64, dust and water-resistant WARRANTY - The Sentinel 250 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Tail Light w/ Laser Lanes - Seat post Mount - USB Cable
Mount your tail light to the reflector tab on the back of a rear cargo rack with this Rack Bracket from Portland Design Works. - Compatible with all PDW rear lights except the Asteroid and Fenderbot - Horizontal holes are 50mm apart to fit European rack standards - Vertical holes are 18mm apart to fit most reflector mounts
The Mini L 1.5 Smart Charger charges the 2-, 3-, and 6-cell lithium-ion batteries for the Seca and Stella lights (sold separately). Pick up an extra to top off your battery at the office. Also compatible with older 9-cell lithium-ion batteries.
Gain more room or find the perfect position for lights, computers, music players, GPS, or whatever, with the Topeak BarXtender. Attaches securely to the handlebars or stem and adjusts for optimum position. - Clamp: Fits 22-38 mm tubes (shims included) - Crossbar: Device mount bar 25.4 mm - Material: Engineering Grade Plastic and Steel - Mount: Handlebar, Handlebar Stem - Size (L x W x H): 18 x 3 x 3 cm, 7.1” x 1.2” x 1.2” (folded) - Size (L x W x H): 13 x 10 x 3 cm, 5.1” x 3.9” x 1.2” (open) - Weight: 116 g / 4.08 oz
This mount is designed to securely attach your Light and Motion Seca, Vega, or Stella headlight (sold separately) to your helmet. With a helmet mount, the light is always pointing where you're looking.
Strap Light & Motion's Vis 360 Spare Front Mount to your spare helmet and use your Vis 360 light no matter what lid you are wearing.
Introducing Nip & Tuck - the next evolution in e-bike safety. Setting the benchmark for an integrated lighting solution, high-powered output is backed by industry-leading compact design. Nip (headlight) illuminates with a 500 lumen even spot beam with versatile low-profile mounting options. Tuck (taillight) blasts a strong red pulse with an innovative under-seat attachment to provide visibility at the highest point on the bike. Both Nip & Tuck feature hi-intensity amber side lighting establishing 360 degrees of protective visibility at intersections and high-traffic areas. Designed to provide peace of mind with safe and effective illumination, Nip & Tuck represents the next level of integrated e-bike lighting. Key features: - 500 lumen headlight and 25 lumen taillight certified to the FL-1 Standard - Engineered for seamless e-bike battery integration - Amber side lighting creates 360 degrees of protective visibility - Pulse mode for high traffic areas/day-time riding - Custom reflectors optimize beam pattern to provide efficient and effective distribution of light - Various low-profile headlight mounting options available - Taillight seat rail clamp with angle adjustment for universal mounting and effective visibility - IP67 Waterproof Rating for all conditions commuting – lights are tested to be fully submersible in 1 meter of water for 30 minutes - Designed and Assembled in California. - Backed by Light & Motion’s 2 Year Warranty and Enhanced Experience Guarantee
USB cable for USB rechargeable batteries. System Compatibility: - Lumina Series - Lightning Bug 120 USB - Sentinel 2W USB - Solas 2W USB - Stinger USB
Vya redefines bike safety with smart, advanced features with an ultra-compact design. This innovative design allows you to mount the Vya Taillight to any GoPro interface attached to your bike rack. - Innovative twist-lock system ensures Vya will lock into mount and not vibrate free - Utilizes third-party GoPro mount interfaces designed for bike racks - Compatible with Vya Pro Taillight and standard Vya Taillight - GoPro base mount not included
Convert your Light & Motion Vis 360 (sold separately) into a head mount and use it wherever your non-helmet adventures may lead you. Excels as a running companion and great for bicycle touring as it transforms your Vis 360 into a camping headlamp.
Need to replace a strap on the compact Vis 180 Pro taillight or the front mount of the Vis 360 Pro? This is a durable direct replacement that installs in seconds and can be cut to the preferred length.
- Modes include High Flash, Medium Steady, Low Steady, DayTime Pulse, NightTime Pulse, Economic Flash - Fully USB rechargeable: no batteries to buy or replace - Runtime up to 11 hours 15 mins - Memory function: light turns on at the last mode it was turned off - Power saving function: 10% power or less, lights will automatically switch to lowest lumen output - Built-in battery indicators: RED = less than 25%, GREEN = fully charged - Side illumination ports
Light & Motion's 11.1v 6-cell Li-ion Battery packs enough juice to illuminate all your epic adventures. Its hook-and-loop strap and small size make it easy to mount to the stem or frame. Plus, it conveniently fits in pockets and packs, too.
This helmet mount works with all CatEye Lights. Pair it with the Volt 800 for the ultimate trail solution.
A powerful, multi-purpose front light with up to 1000 lumens of output. Its machined aluminum body with cooling fins is lightweight and super-rugged. It features eight output modes, with a class-leading 1000 lumen Daytime Flash mode. With its MOR (Maximum Optical Reflection) lens, light output is optimized and evenly dispersed. Battery runtime has increased by 11 hours for up to 87 hours of runtime. And its versatile strap securely mounts to variety of bar shapes and sizes. Remote Switch compatible. Specs - Max Lumens: 1000 - Weight: 153g - Max Runtime: 87 Hours - Recharge Time: 4 Hours
The new Strip Drive Rear Pro has been optimized with our new Wide Angle Optics lens (270° of visibility) and received a massive 32.5-hour increase in maximum runtime for up to 53 hours. It still features a class-leading 300-lumen Daytime Flash mode, in addition to 10 other output options thanks to its five LEDs. Its co-molded construction is now more compact, and can be mounted to aero or round posts. Equipped with a micro-USB port, charging is simple and efficient. Specs - Max Lumens: 300 - Weight: 53g - Max Runtime: 53 hours - Recharge Time: 2 hours
Light up your surroundings and enjoy daytime and nighttime rides with easy peace of mind thanks to Pico’s 100 powerful lumens, combined with the TigerMoth 20-Lumen Taillight. Featuring alloy construction and tool-free installation, Pico is USB-rechargeable with competitive runtime. - USB-rechargeable (charging cable included) - 100-Lumen Headlight - 20-Lumen TigerMoth Taillight - Comes with two bracket mounts, one front-specific and one rear-specific
See and be seen with the powerful, USB-rechargeable TigerMoth 300-Lumen headlight. Features a compact design, alloy construction, and universal tool-free bracket for mounting on bars, stems, or helmets. - USB-rechargeable (charging cable included) - Universal tool-free attachment - Runtime varies from 2–8 hours depending on one of five lighting modes - Output: 300 lumens - Extra mounting brackets sold separately - Mode memory: light automatically lights up in the last mode used
MSW USB rechargeable taillight. Includes micro USB cable for charging. - Tool-free installation - Aluminum body construction - 15 lumen output - Fits 19mm–48mm tubing - 28g weight
Solid aluminum dropper post mount to attach rear bikepacking bag, larger saddle bag, bottle cage, tail light, and more.
The Stick Drive is an incredibly thin and lightweight rear bike light equipped with eight super bright LED emitters. Its minimalistic design is optimized for versatility and ease of use. A simple o-ring securely straps it to a bicycle seatpost, and an innovative magnetic attachment separates the light from the mount for quick charging accessibility. It’s equipped with an integrated USB stick for cable-free charging, providing up to an impressive 23 hours of runtime. The Wide Angle Optics lens creates up to 270° of visibility, and the light outputs up to 30 lumens—this includes a disruptive Daytime Flash feature among its seven modes. With its narrow design and compact mount, the Stick Drive is the perfect taillight for maintaining aerodynamics and also attaching to seatposts with minimal space—like a dropper post. Designed and produced in-house, the Stick Drive is engineered for long-lasting durability and built to be highly water resistant. - Max 30 lumens - USB Rechargeable and magnetic clip-on mount - Wide angle optics with 270° visibility for maximum safety - Aero and round seatpost compatible - Slim design, lightweight and durable - Magnetic clip-in mount - IPX7 water resistant
The WhiteBat provides 100 lumens of brightness via two super-bright half-watt LEDs so you can be seen and feel safe on your after-dark rides. - Tool-free mount fits 19–32mm diameter bars - 2 AA batteries included - Features a 100 Lumen output - High Beam mode 18 hour run time - Low Beam mode 30 hour run time - Flashing mode 45 hour run time
Daily commuting requires equipment that provides superior performance, in any condition, day after day. Urban 1000 blends impressive power with a safety feature set unmatched in cycling lights. High visibility is paramount and the platform has dedicated amber sidelights that are distinct and easily recognizable by drivers, especially through intersections. City riders will appreciate the exclusive SafePulse beam, scientifically designed to provide the highest level of rider awareness without the risks associated with flashing lights. Easily mount on standard or oversize handlebars with a mount that provides enhanced grip and features quick release technology to remove in seconds. Reliable construction is unmatched in the market and exceeds the needs of daily riders. This is the only waterproof lighting platform with a certified IP67 rating – meaning the light is certified to withstand water immersion up to a depth of 1 meter. Commute with the added assurance knowing rain or shine the light will keep performing. Recharging is fast and efficient with the included Micro USB cable. Integrating state-of-the-art safety innovations with premium power, Urban 1000 is designed for the serious cyclist. Features - 1000 Lumen Output certified to the FL-1 Standard with high powered premium CREE LED - Visibility is enhanced with bright amber side lighting providing maximum safety through intersections and high-traffic areas - SafePulse light pattern scientifically designed for maximum driver awareness of approaching cyclist without the inherent dangers of flashing lights - Micro-peened reflector optimizes the beam pattern for road riders providing a smooth, even spot beam void of distracting hard edges - Multiple power settings include a one-touch High/Medium toggle to efficiently decrease intensity when full power is not needed - Multi-color battery indicator is driven by custom firmware to provide accurate battery status throughout entire runtime - Mounting is simple and effective with ultra-grippy rubber ensuring light doesn’t slip on regular or oversize handlebars - Quick release allows the removal of the light in seconds while leaving the base mount on the handlebar - Waterproof design eliminates the leading cause of bike light failure – water immersion - Charging is reliable and effective with included Micro USB Cable Specifications - Lumens: 1000 (high), 500 (medium), 250 (low), 500 (SafePulse) - Runtime: 90 min (high), 180 min (medium), 360 min (low), 720 min (SafePulse) - Beam Angle: 20° (spot) - Charge Time: 360 min
The NiteRider Lumina OLED 1200 Boost is an innovative bike light that removes the guesswork related to battery life, allowing you to plan your next ride safely with complete confidence, day or night. The OLED multifunctional digital display screen delivers precise battery run times as a percentage and actual time for the Lumina OLED's 9 lighting levels. The Lumina OLED 1200 Boost features a custom engineered collimator sense, producing a generous widespread beam pattern. With Boost Mode providing a stunning 1200 lumens of maximum light output, this makes the Lumina OLED highly capable for use when navigating through diverse riding conditions. - New Collimator Lens, distributes a generous even widespread beam - Boost Mode! Unleash maximum LED output - 5 Light Levels plus 4 Daylight Flash Modes - CREE LED at 6000k - Multifunctional OLED screen provides detailed operational information - FL1 Standard IP64, water resistant - Intellicharge – Reduce charge time in half! - Backlit buttons for easy to use interface in any lighting condition - Secure on and off-road capable handlebar mount - Fits standard and oversize 35mm handlebars - Convenient USB rechargeable WARRANTY - The Lumina OLED 1200 Boost is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Light Head with OLED Display - Internal Li-Ion Battery - Handlebar Mount fit up to 35mm - USB Charging Cable
The NiteRider Lumina OLED 1200 Boost is an innovative bike light that removes the guesswork related to battery life, allowing you to plan your next ride safely with complete confidence, day or night. The OLED multifunctional digital display screen delivers precise battery run times as a percentage and actual time for the Lumina OLED's 9 lighting levels. The Lumina OLED 1200 Boost features a custom engineered collimator sense, producing a generous widespread beam pattern. With Boost Mode providing a stunning 1200 lumens of maximum light output, this makes the Lumina OLED highly capable for use when navigating through diverse riding conditions. The NiteRider Solas 250 uses two powerful LEDs to produce an amazing 250 lumens of light output. It features 4 modes (2 flash / 2 steady) and is USB rechargeable. We’ve implemented what we call “Group Ride Mode” for cyclists who want to stay visible but not distract others in the pack. LUMINA OLED 1200 BOOST - New Collimator Lens, distributes a generous even widespread beam - Boost Mode! Unleash maximum LED output - 5 Light Levels plus 4 Daylight Flash Modes - CREE LED at 6000k - Multifunctional OLED screen provides detailed operational information - FL1 Standard IP64, water resistant - Intellicharge – Reduce charge time in half! - Backlit buttons for easy to use interface in any lighting condition - Secure on and off-road capable handlebar mount - Fits standard and oversize 35mm handlebars - Convenient USB rechargeable SOLAS 250 - Daylight Visible Flash (DVF) - 250 lumen super bright tail light - Group Ride Mode – be seen without distracting fellow cyclists - Easy on and off seat post strap mount with quick release tab - Convenient USB rechargeable - Super bright daytime flash mode - Be Seen by cars = Be Safe - FL1 Standard IP64, dust and water-resistant WARRANTY - The Lumina OLED 1200 Boost is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES LUMINA OLED 1200 BOOST - LED Light Head with OLED Display - Internal Li-Ion Battery - Handlebar Mount fit up to 35mm - USB Charging Cable SOLAS 250 - LED Tail Light - Seatpost Mount - USB Cable
Lezyne's Femto Drive Pair are compact, bright, and beautifully made front and rear safety lights. The Femto Front is an ultra-compact safety light with integrated lens On/Off switch. Durable machined aluminum construction. Side Visibility lens extends beyond body to provide 180 degrees of visibility. Two replaceable CR2032 batteries power one bright LED. Up to 15 lumens with two output/flash options. Available in seven unique anodized colors. Versatile 2-in-1 Clip-On System straps to bars or clips to loops. The Femto Rear mirrors the design of the Femto Rear, but puts out up to 7 lumens of red light with two output/flash modes.
Lezyne's Zecto Drive is a low-profile, high-visibility light with three ultra bright LEDs. Up to 250 lumens and seven output options. Lightweight and durable composite matrix body with machined aluminum faceplate. Intelligent Power Indicator displays battery life and provides side visibility. Convenient Micro-USB rechargeable design. Patented versatile 2-in-1 Clip-On System straps to bars or clips to loops.
- Front Modes include High Steady, Low Steady, DayTime Pulse, NightTime Pulse, and Economic Flash. - Rear Modes include High Flash, Low Steady, DayTime PULSE, NightTime Pulse and Economic Flash - Fully USB rechargeable: no batteries to buy or replace - Runtime up to 15 hours for front and 7.5 hours for rear - Memory function: light turns on at the last mode it was turned off - Power saving function: 10% power or less, lights will automatically switch to lowest lumen output - Built-in battery indicators: RED = less than 25%, GREEN = fully charged - Multiple Mounting Options: vertical or horizontal mounting options as well as a clip for mounting to packs, bags or belts
Page 1 of 4 Next page