Tools
$15.00
The 45NRTH stud insertion tool seats and removes the stud from the stud pocket. Customize your stud tread pattern or replace missing studs. Works with all 45NRTH studdable and studded products.
- Tire studs sold separately
- POM-injected handle
- Stainless steel barrel
- Thumb and index finger grips for more comfort and control
- Compatible with studs that have a 3.5mm or smaller shaft
$20.99
Get the most from your Bontrager Switch Lever thru axle system.
Product details
- Original equipment replacement lever for Bontrager Switch Flip thru axles
- Can be kept inside the thru axle or left off the bike to save weight
- Lever is held securely by internal O-ring on the thru axle
$26.99
High-performance bicycles require precision during setup and adjustment. The Preset Torque Wrench provides secure adjustments while preventing damage to lightweight bars and forks from over-tightening.
Product details
- Tools are pre-set to 5Nm or 6.8Nm
- Check component tightening specifications before using
- 4mm and T25 keys are non-removable
$33.99
The ultimate trailside companion.
These high tensile steel multi-tools feature a precise fit and finish and side grips for a secure handhold even with gloves on.
The m19 includes:
- Chain tool: 8/9/10 speed compatible
- Spoke wrench: #0, 1, 2, 3
- Hex wrenches: #2, 2.5, 3, 4, 5, 6, 8
- Open wrench: 8mm, 10mm
- Screwdrivers: Phillips #1, Phillips #2, flat #2
- Torx: t-10, t-25
- Stainless steel carrying case
- Length: 89 mm
- Weight: 175g
- Warranty: lifetime
$39.99
The ultimate trail-side companion.
Details
- 20 high tensile steel multi-tools, including an integrated tire plug tool
- Tire plugs come included with a storage case that mounts directly to the tool
- The case can be used to conveniently store chain links
Specs
- Chain Tool: 8/9/10/11/12 speed compatible
- Hex Wrenches: #2, 2.5, 3, 4, 5, 6, 8
- Length: 89mm
- Open Wrench: 8mm
- Screw Drivers: Phillips #1 & #2, flat #1
- Specialty Tools: Tire plug tool, tire plugs, valve core removal tool, rotor straightener
- Spoke Wrench: #0, 1, 2
- Torx: T-10, T-25
- Warranty: Lifetime
- Weight: 203g
$22.00
The Bead Dropper tire tool significantly helps in removal and installation of CushCore tire inserts, especially the critical step of dropping the bead into the rim channel.
- Rubberized ergonomic handle
- Unique "thumb flange" makes it easy to apply pressure to the tire bead
- Sturdy, durable plastic lever—strong enough for DH tires, yet won't scratch your rims
- Lifetime warranty
$2.99
Park Tool's Replacement Chain Tool Pin (2-Pack) fits Park Tool's CT-1, CT-2, CT-3, CT-3.2, CT-5, and CT-7 Chain Tools.
• Made from hardened alloy tool steel
• Uses 7mm or 9/32" 12 pt box end/socket
• Sold singly or in pairs
$8.95
Park's Four-Sided Spoke Wrenches grip 4 sides of the spoke nipple so they offer an excellent grip and won't slip or round nipples when turning even the tightest spokes and/or aluminum nipples. These popular wrenches also have easy-to-hold vinyl-coated loop handles that are color-coded according to spoke size for easy identification. The loop handle makes them easy to hang on your tool board too.
$9.95
Heat-treated alloy tool steel, one inch base fits wrench or bench vise. Thin-wall construction allows use without removal of cones and locknuts. The FR-5 has 12 splines that are approximately 23.4mm across.
- Fits Shimano, SRAM, Sunrace, Suntour, Chris King and other cassette lockrings
- Fits the SRAM XX1 11-speed cassettes
- Also fits Shimano disc brake lockrings
- Always use a quick-release skewer to hold the tool in place and snug to cogs when loosening; for solid axles, use the axle nut
$10.99
A worn chain shifts poorly and wears sprockets at an accelerated rate. Park Tool's Chain-Wear Indicator is a “go-no go” gauge designed to accurately indicate when a chain reaches .5% and .75%, the points at which most chain manufacturers suggest replacement. The updated CC-3.2 is longer, more accurate and features permanent measurement markings.
$11.99
• Updated to fit better in the hand with a more rounded, smoother shape
• The precision sized SW-7.2 fits the three most popular spoke nipple sizes on the market
• Nickel plated for years of service
• Designed for the home mechanic.
FIts the following size spoke nipples:
• .127" (3.23mm)
• .130" (3.30mm)
• .136" (3.45mm)
$14.95
Park Tool introduced the bicycle world to the 3-way hex wrench set over 30 years ago. Our 3-way wrenches fit perfectly in the palm of the hand and provide excellent leverage, making them a favorite of countless shop mechanics worldwide.
AWS-1 FEATURES
- 4mm, 5mm, and 6mm hex set
- Wrenches made from industrial tool steel, through hardened and tempered for long life
- Chamfered tips for a perfect fit
$20.99
Also called a sleeping hub, the Dummy Hub slides into rear dropouts and replaces the rear wheel for chain cleaning and transport. The DH-1 works with all derailleur and 1/8" chain. The unique design allows the bike to be shifted and works with open dropout and thru-axle frames up to 12mm.
$20.99
Designed and built especially for singlespeed bikes, Park's SS-15 Single Speed Spanner is a durable forged-steel tool with a 15mm socket wrench for axle nuts, 15mm open-end wrench for pedals, a tire lever, and a bottle opener. It's just the right size to take along on rides and is great for wrenching in your shop too.
$24.95
A clean bike is a happy bike! Park Tool's Bike Cleaning Brush Kit is a four-piece brush set designed specifically to clean bicycles. Ergonomically designed and featuring dual-density, sure-grip handles, the BCB-4.2 kit includes:
• 1 GSC-1 Gear Clean Brush
• 1 Tapered Detail Brush
• 1 Frame Cleaning Sponge/Bristle Brush
• 1 Soft Bristle Soaping Brush
$24.95
Designed and built to remove and install the direct mount lockring that retains front chainrings found on some Specialized, Cannondale and FSA modular cranks.
- Fits chainring of Specialized, Cannondale and FSA
- For lockrings with 47–48mm outside diameter and 4 or 8 notches
- Fits both 4 notch (FSA and Cannondale) and 8 notch (Specialized) lockrings
- 36mm hex drive to be used with Park Tool TWB-36 Crow Foot and a torque wrench to properly measure torque
- Constructed of 4140 heat-treated steel and plated for long life
$34.95
The MTB-5 packs 16 functions into one slim, tough folding multi-tool, making it the ideal companion for any trailside adjustment or emergency fix. Features a full set of hex wrenches and screwdrivers, a T25 Torx-compatible driver, and five specialty tools to aid in common on-the-ride repairs.
Includes the following:
- 2, 2.5, 3, 4, 5, 6 & 8 mm hex wrenches
- T25 Torx-compatible driver
- Philips #2 cross tip & flat head screwdrivers
- Chain tool (5 to 12 speed compatible)*
- Spoke wrenches (equivalent to SW-0 and SW-2)
- Presta valve core removal tool
- Disc brake rotor truing tool
- Disc brake pad spreader
*The MTB-5 will not peen Campagnolo 11, 12 or 13 speed chain rivets
- Dimensions: 3.1" x 1.8" x 0.8" (79 x 45 x 20 mm)
- Weight: 6.9 oz. (195 g)
- Replaceable chain tool pin (Part #985-1)
$35.95
Updated to fit current 12-speed cassettes, this combination chain whip and freewheel / lockring remover wrench is heat treated to prevent bending, flexing and wear and features a long, molded handle in addition to a built in hex shaped driver.
- Works on 5- to 12-speed road and mountain bike cassettes and freewheels
- 1-inch (25.4mm) box-end wrench fits Park Tool Freewheel / Cassette Lockring Tools
- Features hardened pins to keep the chain in place
$44.99
A professional quality shop chain tool that works on 5-speed to 12-speed Road and Mountain Bike derailleur chains*, including SRAM AXS 12 speed, as well as 1/8-inch and 3/16-inch chains. The CT-3.3 features an adjustable locating shelf so it works on any width chain to remove and install chain rivets. Built to last and easy to use, the CT-3.3 features a comfortable handle, investment cast steel body and replaceable driving pin (#CTP).
*The CT-3.3 will install, but not peen, Campagnolo 11 and 12-speed chain rivets.
- Comfortable T-handle
- Replaceable driving pin (CTP)
- Investment cast steel body
- Adjustable locating shelf
$155.95
The BKM-1.2 Hydraulic Brake Bleed Kit will bleed most models of mineral oil-based hydraulic bicycle disc brakes, including models made by Shimano®, Magura®, TRP®, Tektro®, Trick Stuff®, SRAM® DB8, Campagnolo®, Promax®, and Clarks®. Bleeding of hydraulic brakes removes air bubbles and contaminants from the braking system, for long-lasting components and peak performance.
The BKM-1.2 is built for the rigors of daily commercial use and includes two syringes, hoses with shutoff clips, multi-size bleed blocks, a bleed funnel, and a set of our unique mountable syringe holders, as well as multiple hose fittings to fit the multiple standards found on hydraulic bicycle brake systems. Every part is replaceable and available from Park Tool. Housed in a rugged storage case.
Includes:
- Two 20 mL syringes
- Two hose assemblies with shutoff clips
- One hose assembly with integrated fitting for bleed nipples such as those found on Shimano® mineral oil brake systems
- One open-ended hose assembly
- Bleed funnel with stopper
- Two 10 mm/12 mm universal bleed blocks
- Two 11 mm bleed blocks
- Two adjustable syringe holders
- M4 x 0.7 adapters — SRAM® DB8, Trick Stuff®, Campagnolo® (x2)
- M5 x 0.8 adapter — Formula™ Cura™, Tektro®, Hayes® (x2)
- M6 x 0.75 adapter — Magura®
- M6 x 1.0 adapters — universal (x2)
- M6 x 1.0 adapter — Promax®
- M7 x 0.75 adapter — Shimano®
- Hose compression sleeve — universal
- Fluid disposal bag
- Set of spare O-rings and hose
- Replacement parts available
- Brake fluid not included
NOTE: The BKM-1.2 is for mineral oil-based hydraulic bicycle brake systems only. DOT fluid and mineral oil should never be mixed in the brake system or in their respective service tools. Cross-contamination of brake fluid may cause seal failure which may result in brake failure. For brakes using DOT fluid use the Park Tool BKD-1.2 Hydraulic Brake Bleed Kit — DOT.
$4.50
The tire lever, though seemingly one of the simplest and most basic of cycling tools, is one commonly used by almost every cyclist, and unfortunately, one often responsible for unnecessary frustration. Really, what is more fun than flatting far away from home, being thrilled you lugged that spare tube and pump, and then having your tire levers snap in two? Pedro's award-winning, universally loved tire levers feature molded box construction and a proprietary plastic composite blend that makes them the strongest levers available. The unique chisel tip shape easily inserts beneath the tire bead and the slightly thicker shape keeps the lever securely in place. Additionally, the bold shape of the lever and helpful dual spoke hooks makes removal of even the tightest tires a simple task.
- Award-winning and universally loved
- Molded box construction and proprietary plastic blend makes these the strongest levers available
- Chisel tip shape is easy to insert beneath the bead and the slightly thicker shape keeps the tire lever from slipping
- Bold shape makes it easy to remove the tightest of tires without bending or breaking
$18.00 - $21.00
• Service kits include air can seals and wiper
• Available for RockShox air rear shocks--Ario, Monarch, Monarch RT3, DebonAir and Monarch Plus
$42.00
Service kits include dust seals, foam rings, oil seals, air and damper o-rings needed for basic service.
$53.00
- Trek Reaktiv Thru Shaft 200 hour service kit
$65.00
- 200 Hour/1 Year Service Kit for Deluxe/Deluxe Remote A1-B2 (2017-2020)/Deluxe Nude B1+ (2019+)
- Includes Air Can Seals, Piston seal, Glide Rings, IFP Seals, Remote Spares
$8.50
Removes Presta and Schrader valve cores. CNC machined, anodized finish with laser-etched logo. Fits between spokes for quick and easy core removal. Features knurled end for a no-slip grip.
$25.00
Stan's Dual Action Repair for Tubeless (DART) fixes damaged tires faster, easier, and better than existing plug tools. While traditional tire plugs try to wedge rubber strips into a puncture, the DART creates a chemical reaction with your Stan's sealant to quickly form a permanent airtight bond. The DART's plastic tip is barbed to anchor firmly in place and stay put during even the most aggressive riding while being safer for rims, rim tape, and your hands. The material of the DART is also more flexible, and its laser-cut shape is optimized to contour to the shape of different punctures, maximizing surface area to increase the sealing reaction. Because the DART anchors to your tire and creates an instant bond with your sealant, it also won't pull out while riding the way a conventional plug can. One of the best features of the DART's design is that it doesn't require trimming once inserted, and excess material won't get in the way of your ride. DARTs can't be felt while riding, even on road tires, and they wear smooth naturally.
- Repairs large punctures and slices
- Reacts with Stan's sealant to form an instant, airtight seal
- Barbed plastic tip anchors into tire and will not pull out when riding
- Flexible material and laser-cut shape conforms to puncture and bonds with sealant
- Wears off clean, no trimming needed, and can not be felt while riding, even on road tires
- Lightweight, compact tool fits the shape of your hand for more precise use and includes built-in valve core remover
- Includes two pre-loaded DARTs for sealing multiple and larger punctures
- Clear caps keep DARTs clean and unthread quickly for fast deployment
- Simple and easy to refill
$18.95
- Two sturdy tire levers also work as a chain master link tool to remove and install chains
- Includes a chain hook to make installation and removal easy
- Features a valve core tool as well as a place to store a spare quick link
$11.99
- 15 mm opening is laser cut with precision and perfect angle to help you loosen the pedals as easy as possible
- 270mm of length for extra leverage
- Small and light weight, perfect for toolbox and traveling
Page 1 of 1